0 Replies Latest reply on Jun 24, 2017 12:21 AM by Jie_Zhou

    Arduino 101 Zephyr Application Flash


      Hi Intel team,


      I want to compile and flash a bluetooth advertise and scan application onto the Arduino 101. The file is in the Zephyr folder when you download the M or the Z Tree of the ODK. I was compiling in the Z-Tree but notice I couldn't compile applications written in the Zephyr file so I moved to the zephyr file. The file path that I want to flash is CODK/zephyr/samples/bluetooth/beacon.


      My hardware setup

           - arduino 101

           - a FTDI USB to serial converter cable with pin 1 to ground, and pin 4 and 5 to TX and RX respectively

      Using a Ftdi USB to serial converter cable to run Hello example

      My software:

           -Linux Ubuntu 16.04

           -cutecom with device set to /dev/ttyUSB0

           -operating in zephyr folder


      I don't care where I have to be, whether in the Z-tree or the zephyr file or even something completely different. I just need to be able to flash the beacon application on to my setup.