This message was posted on behalf of Intel Corporation
Hi Hagen: Thank you very much for joining the Intel® NUC communities.
First, I just wanted to confirm that the memory RAM you are using is fully compatible:
Now, at this point what we can try, not sure if you did this already, is to test the memory RAM on each memory slot and disconnect the SSD, we should get the BIOS that way, an error message or the splash screen at least. Also this step will help us rule out a possible problem with any of the memory slots.
Besides that the next thing to do will be to use a different VGA cable or if it is possible to test it with an HDMI cable.
We can also try a BIOS recovery to 0038:
If the problem persists after that, then the next thing to do will be to replace the NUC. Remember it has 3 years of warranty with Intel, please get in contact with Intel directly in order to do that:
Chat support: http://intelsupportchat.force.com/icslivechat/ics_tech_processor_ww_english_Chat,
For phone support, depending on your location, you will see the contact information on the links below:
EMEA contact information: http://intel.ly/28QeAF3
APAC contact information: http://intel.ly/1ITfjUF
LAR contact information: http://intel.ly/29c0rW4
North America: Phone Number 1-916-377-7000, Monday - Friday 7:00 AM to 5:00 PM (Pacific Time).
Any further questions, please let me know.
Thanks for the answer!
I get the mistake :-)
The internal connector between the mainboard and the cable of the vga plug at the casing was wrong: it has two lines of pins and only one line was pluged in :-/ Because of the big label at the cable i didn't see it at once.