7 Replies Latest reply on Jul 3, 2017 10:13 PM by Intel Corporation

    QSFP+ Configuration modification is not supported by this adapter for XL710 QDA2

    Prashant_chauhan

      Hi ,

      I was  trying to set up Intel XL710 in 2x40 mode using the QCU but I am getting the error ""QSFP+ Configuration modification is not supported by this adapter."

      Although If I try to check the current configuration it shows the mode as N/A.

       

      All the steps that I followed:

       

      [root@ndr730l:/tmp/EFIx64] ./qcu64e /devices

      Intel(R) QSFP+ Configuration Utility

      QCU version: v2.27.10.01

      Copyright(C) 2016 by Intel Corporation.

      Software released under Intel Proprietary License.

       

      NIC Seg:Bus Ven-Dev Mode    Adapter Name

      === ======= ========= ======= ==================================================

      1) 000:005 8086-1583 N/A Intel(R) Ethernet Converged Network Adapter XL710-

       

      [root@ndr730l:/tmp/EFIx64] ./qcu64e /info /nic=1

      Intel(R) QSFP+ Configuration Utility

      QCU version: v2.27.10.01

      Copyright(C) 2016 by Intel Corporation.

      Software released under Intel Proprietary License.

      QSFP+ Configuration modification is not supported by this adapter.

       

      MAC Address: 3CFDFE16FE80

      Serial Number: XL710QDA2BLK

       

      Firmware details:

      ethtool -i vmnic4

      driver: i40e

      version: 1.4.28

      firmware-version: 5.04 0x800024d8 17.5.10

      bus-info: 0000:05:00.0