A few people have had this error in the past year.
I am unable to find a clear solution in those posts. I downloaded the patch provided by ddiakopoulos, but I am not sure how to apply it correctly. I tried patch p1 < UVC-Remove-extra-commit-on-resume.patch, which gives me the error "can't find file to patch at input line 5" and then asks me to provide a file, which tells me there's simply no way I am doing this right.
I also tried to run the script patch-uvcvideo-ubuntu-mainline.sh provided in the scripts folder, but it fails at sudo apt-get build-dep linux-image-$(uname -r) with the error
Picking 'linux-ubilinux' as source package instead of 'linux-image-4.4.0-ubi4-amd64'
E: Build-Depends dependency for linux-ubilinux cannot be satisfied because candidate version of package kernel-wedge can't satisfy version requirements
I tried googling this error but I haven't found anything useful.
Is there any more detail you could provide me with to solve this probelm? I am running ubilinux 3.0 for the up-board with kernel version 4.4.0-ubi4-amd64.
This message was posted on behalf of Intel Corporation
I’d recommend you to look at the Intel RealSense Robotic Development Kit Quickstarted Guide, that is the official guide, in order to follow the instructions to install Ubuntu 16.04 LTS, add the open source Linux-up board kernel (provide the kernel video capture format necessary for the Intel RealSense camera), provide kernel source access, and install Librealsense.
Moreover, for this case as you have tested using another R200 camera and it works with your current set up, your other camera may have a hardware issue and I’d suggest you to contact Click Support or the place of purchase where you bought the camera to request a replacement.