I disconnected all drives from the board and have only 2 sticks of memory in, and it is still giving the same light sequence.
While I'm still working on the meaning of those Leds; now that you mentioned that is not posting and that you have an Intel Xeon E5410 Server CPU 2.33GHz 12MB Cache 1333MHz Quad Core. We need to make sure that your board is fully compatible with the processor.
You may want to check the PBA number on the board, there is a white sticker with the PBA and Serial number. Please check it against the Compatibility List
One stick of memory, 1 CPU
Does not boot to BIOS, and DOES not give the lights.
The only lights that are on, are the [Status Led]
This is mine. Not sure what my BIOS version is though, as I am unable to get into the BIOS
S5000PSLSASR 892051 E11025-302 or later BIOS version 84 or later
There are some more steps we need to try:
-Do you get any beep codes if you remove all memory?
-We would like to have more information about the system.
-Also are you using an Intel chassis? if so please provide us the model
-Keep in mind that we need to do this test with socket 1 processor.
-Try using the other processor and see if it does the same.
-Try the board outside the chassis just to discard any grounding issues.
Everything points that the board may be defective but we will not know for sure until we try the steps provided. Also if possible please share with us the specific PBA number that your board shows.
I think I might have just found the issue.
I looked back at the video I did, of installing the CPUs, and this was an issue when I got it.
I just never noticed it, until now.
As you can see, some of the pins are missing.
Please let me know if this is the way it supposed to be.
I do not think it is.
That is not the way it supposed to be at all. If this is CPU1 slot then the board will not be working correctly so this is the root cause of the issue you are having now.
I purchased it through eBay.
I checked the Video of my unboxing the Board, and it WAS like that when I got it.
I just did not notice it. I cannot see why I didn't??
Waiting on a reply back from the seller, and doing a refund on the board.
The eBay seller called me on the phone just a little while ago.
He apologized for the issue of the bad board.
He told me to keep it.
He told me he will hand pick one and test it, and ship it out to me today.
So. Hopefully, all should be good come Monday.