I reviewed the technical specification for this motherboard, but I could not find information that would indicate that this feature is present with this model; however, please follow the steps below in order to check if it is present in your BIOS configuration.
- Enter your BIOS configuration
- Go to the "Performance" tab.
- Look for "Fail save" or " Watchdog Timer".
- Enable it.
When enabled, the Watchdog timer will catch system hangs and/or failures and reset the system when a POST failure is detected. If a failure occurs, the Watchdog Timer assertion should reset the system and boot using default settings as well as display a warning message.
Let me know how it goes.