1 Reply Latest reply on Feb 28, 2010 3:44 PM by Aryan2411

    How to change user eccess level to bios_DG41RQ

    irfanor

      ""IM NEW TO THIS DISCUSSION""

      BUT i hav a trouble in my DG41RQ.

      i cant change my bios password neither anyother thing(boot order etc).When i check USER ACCESS LEVEL.<<<<It is read only

      no option in bios respond to mouse click...I also removed battery but in vain..plz help im w8ing for your kind suggestions..

        • 1. Re: How to change user eccess level to bios_DG41RQ
          Aryan2411

          Hello,

           

           

          Here are steps how to clear the password.

           

          Change the Bios Jumper to Configuration Mode:

           

          BIOS Configuration Jumper
          The three-pin BIOS jumper block enables all board configurations to be done in the BIOS Setup program.

          jumper.jpg

          The following table shows the jumper settings for the BIOS Setup program modes.

           

          Jumper SettingModeDescription
          jumper1.jpgNormal (default) (1-2)The BIOS uses the current configuration and passwords for booting.
          jumper2.jpgConfigure (2-3)After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu.
          jumper2.jpgRecovery (none)The BIOS recovers data in the event of a failed BIOS update


          Then boot up your system, if jumper configured properly, it should go directly into the bios without pressing F2.

          You will have a screen similar to this:

          11.png

          Select Clear Bios Password

          Save and Exit.

           

          All the best,

           

          Regards,

          Aryan