This message was posted on behalf of Intel Corporation
Yes, it is supported. Below you will find the steps in order to set up this configuration.
Wake-on-LAN must be enabled in the board BIOS and then configured in the operating system.
To enable Wake-on-LAN in the BIOS:
- Press F2 during boot to enter BIOS Setup.
- Go to the Power menu.
- Set Wake-on-LAN to Power On.
- Press F10 to save and exit the BIOS Setup.
To configure Wake-on-LAN in Windows 8* or Windows 7*:
- Go to Device Manager.
- Expand the Network Adapters section.
- Right-click the adapter in use and click Properties.
- Click Advanced tab.
- Select Wake on Magic Packet from the Property list.
- Expand the Value section and select Enabled.
- Click Power Management tab.
- Select the check box for Allow this device to wake the computer.
- Click OK.
Regarding Ubuntu, this operating system has not been officially validated to work with this Intel® NUC Kit; therefore, we do not have documentation of the possible scenarios with Ubuntu. We do know that a lot of NUC owners are using it successfully on many different Linux distros, and maybe you can try using their Forum support; Ubuntu Forums.
Please let me know if it helps.