Suggest you remove and then reinstall the SSD. Also, you need to have UEFI enabled in BIOS Setup (Visual BIOS).
Hope this helps,
Thank you very much to N.Scott.Pearson for the information provided previously.
As you mentioned, the SSD is listed under the tested peripherals of the NUC.
So, please try the suggestions provided by N.Scott.Pearson and if by any chance you have the option to test another SSD, that will a good thing to try in order to rule out a possible problem with the M.2 port.
Please let us know the results of trying the steps above.
Any further questions, please let me know.
Thanks for yours answers.
The nuc is in UEFI mode, And i checked to remod and install it again, since the BIOS 0057 the disk it´s NOT detected.
I test the disk on a gigabyte motherboard and works fine (the ssd is brand new)
You are welcome.
Thank you very much for letting us know those results.
Now we know the SSD is working fine for sure.
Do you have the option to test the NUC with a different M.2 SSD? This is because the problem could be related to the port on the NUC, it might be a hardware problem, by trying that we will be able to confirm if that is the source of the problem.
Please let me know the results of trying the step above.
Any questions, please let me know.