cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to upgrade my firmware for Intel 600P Series 128GB M.2 SSD

DEngl6
New Contributor

Unable to upgrade my firmware for Intel 600P Series 128GB M.2 SSD

Run inside NUC6i3SYK Bios SYSKLi35.86A.0057.2017.0119.1758

Update using SSD Firmware Update Tool is missing Kernel module i915 and X11 will not start.

8 REPLIES 8

idata
Esteemed Contributor III

Hello Dave.English

We understand that you're experiencing some problems while trying to update to the latest firmware for your Intel® SSD 600p Series using our Firmware Update Tool.If you're using Windows*, please download and install our latest Intel® SSD Toolbox. You should be able to update your firmware using this tool. - Ihttps://downloadcenter.intel.com/download/26574?v=t ntel® SSD Toolbox Version 3.4.0 (latest).- http://www.intel.com/content/www/us/en/support/solid-state-drives/000006345.html Intel® SSD Toolbox User Guide (Page 27-28).Please post your results, or let us know if you experience issues with this method as well.Best regards,Carlos A.

DEngl6
New Contributor

We are don't use windows at all, we are all unix / linux in our corp.

idata
Esteemed Contributor III

Hello Dave.English,

Do you have any different model NUCs, or non-NUC systems capable of supporting the 600p Series that you could use to try and run the Firmware Update Tool in as a workaround?If not, please switch your BIOS to Legacy Mode and disable http://www.intel.com/content/www/us/en/support/boards-and-kits/000006699.html Fast Boot, then try to run the Firmware Update Tool again.If neither of these options work, please let us know.Best regards,Carlos A.

DEngl6
New Contributor

That's not the issue X11 will not start with the Firmware upgrade tool, Update using SSD Firmware Update Tool is missing Kernel module i915 and X11 will not start.