4 Replies Latest reply on Mar 10, 2017 9:51 AM by Intel Corporation

    Wifi station mode not working

    JosL

      Hello,

       

      I'm a problem with the wifi station mode. The system switch to this mode correctly with this commande: /etc/init.d/autostart-supplicant.sh start

      All my wifi ssid are showed and I can configure ssid and psk. All are correctly saved into file /etc/wpa_supplicant.conf, but when I apply the configuration the board does'nt connect to my network.

      I'm testing with 2 differents routers, but it's not possible to get ip.  When I use the command select_net it's reply OK

       

      (after this post: WiFi connection suggestion I'm testing to change channel, but not difference)

       

      I'm also an another problem with wifi, if I reboot the board in command line, the wifi card wlan0 never appears. But if I remove power and restart, the network work again.

       

      Can you help me to resolve it?

       

      This is the content of the /etc/wpa_supplicant.conf

      ctrl_interface=/var/run/wpa_supplicant

      ctrl_interface_group=0

      update_config=1

       

      network={

           ssid="myssid"

           psk="mypassword"

           key_mgmt=NONE

      }