9 Replies Latest reply on Mar 23, 2017 10:04 AM by Intel Corporation

    SR-IOV support for Z170 and I5-6600

    yn123abc

      Dose Z170 motherboard and I5-6600 support SR-IOV?@

        • 1. Re: SR-IOV support for Z170 and I5-6600
          Intel Corporation
          This message was posted on behalf of Intel Corporation

          Hello yn123abc,
           
          Thank you for contacting the Intel community.
           
          Both the chipset and the processor support virtualization so I’m sure it will be supported, you will need to get an Intel® Ethernet Adapters and Controllers that support SR-IOV, you can check for more information here:
          http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000005722.html?wapkw=sr-iov
           
          In addition, you can watch a video related with the SR-IOV:
          http://www.intel.com/content/dam/www/program/support/us/en/videos/Intel-SR-IOV-Explanation.mp4
           
          Please let me know if that can help you.
           
           
          Best regards,
           
           
          Ivan.
           

          • 2. Re: SR-IOV support for Z170 and I5-6600
            Intel Corporation
            This message was posted on behalf of Intel Corporation

            Hello yn123abc,
             
             
            I’m following on this post to ask you if the information provided above was useful for you or if you need further assistance.
             
             
            Regards,
             
             
            Ivan.
             

            • 3. Re: SR-IOV support for Z170 and I5-6600
              yn123abc

              Hi Ivan,

               

              I tried a SR-IOV device in this platform and meet some problems. The VF devices configuration space return 0xff for all address.

              Below is my log:

              [root@localhost Linux_Driver_PF0]# lspci

              00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)

              00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07)

              00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06)

              00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)

              00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)

              00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)

              00:17.0 SATA controller: Intel Corporation Device a102 (rev 31)

              00:1b.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Root Port #17 (rev f1)

              00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)

              00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)

              00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1)

              00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)

              00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1)

              00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)

              00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)

              00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)

              00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)

              00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)

              01:00.0 Memory controller: Xilinx Corporation FPGA Card XC7VX690T

              01:00.1 Memory controller: Xilinx Corporation Device 7138

              01:08.0 Unassigned class [ffff]: Xilinx Corporation Device 7238 (rev ff)

              01:08.1 Unassigned class [ffff]: Xilinx Corporation Device 7238 (rev ff)

              01:08.2 Unassigned class [ffff]: Xilinx Corporation Device 7238 (rev ff)

              01:08.3 Unassigned class [ffff]: Xilinx Corporation Device 7238 (rev ff)

              04:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)

              05:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)

              [root@localhost Linux_Driver_PF0]# lspci -t

              -[0000:00]-+-00.0

                         +-01.0-[01]--+-00.0

                         |            +-00.1

                         |            +-08.0

                         |            +-08.1

                         |            +-08.2

                         |            \-08.3

                         +-02.0

                         +-14.0

                         +-14.2

                         +-16.0

                         +-17.0

                         +-1b.0-[02]--

                         +-1c.0-[03]--

                         +-1c.4-[04]----00.0

                         +-1c.5-[05]----00.0

                         +-1d.0-[06]--

                         +-1d.4-[07]--

                         +-1f.0

                         +-1f.2

                         +-1f.3

                         +-1f.4

                         \-1f.6

              [root@localhost Linux_Driver_PF0]# lspci -s 00:01.0 -vvv

              00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07) (prog-if 00 [Normal decode])

              Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

              Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

              Latency: 0

              Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

              I/O behind bridge: 0000f000-00000fff

              Memory behind bridge: df200000-df2fffff

              Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

              Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

              BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

              Capabilities: [88] Subsystem: Gigabyte Technology Co., Ltd Device 5000

              Capabilities: [80] Power Management version 3

                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

              Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-

                Address: fee002b8  Data: 0000

              Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00

                DevCap: MaxPayload 256 bytes, PhantFunc 0

                 ExtTag- RBE+

                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

                 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

                 MaxPayload 256 bytes, MaxReadReq 128 bytes

                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

                LnkCap: Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us

                 ClockPM- Surprise- LLActRep- BwNot+

                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

                 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

                LnkSta: Speed 8GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+

                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

                 Slot #1, PowerLimit 75.000W; Interlock- NoCompl+

                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

                 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-

                 Changed: MRL- PresDet+ LinkState-

                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

                RootCap: CRSVisible-

                RootSta: PME ReqID 0000, PMEStatus- PMEPending-

                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via WAKE# ARIFwd-

                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Via WAKE# ARIFwd-

                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-

                  Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

                  Compliance De-emphasis: -6dB

                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+

                  EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-

              Capabilities: [100 v1] Virtual Channel

                Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

                Arb: Fixed- WRR32- WRR64- WRR128-

                Ctrl: ArbSelect=Fixed

                Status: InProgress-

                VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

                 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-

                 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff

                 Status: NegoPending- InProgress-

              Capabilities: [140 v1] Root Complex Link

                Desc: PortNumber=02 ComponentID=01 EltType=Config

                Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+

                 Addr: 00000000fed19000

              Capabilities: [d94 v1] #19

              Kernel driver in use: pcieport

              • 4. Re: SR-IOV support for Z170 and I5-6600
                yn123abc

                Initializing cgroup subsys cpuset

                Initializing cgroup subsys cpu

                Linux version 2.6.32-504.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Oct 15 04:27:16 UTC 2014

                Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-504.el6.x86_64 ro root=UUID=1790d28d-642c-4e06-ac13-9624e84b6240 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet

                KERNEL supported cpus:

                  Intel GenuineIntel

                  AMD AuthenticAMD

                  Centaur CentaurHauls

                BIOS-provided physical RAM map:

                BIOS-e820: 0000000000000000 - 000000000009c800 (usable)

                BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)

                BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

                BIOS-e820: 0000000000100000 - 0000000082c16000 (usable)

                BIOS-e820: 0000000082c16000 - 0000000082c17000 (ACPI NVS)

                BIOS-e820: 0000000082c17000 - 0000000082c41000 (reserved)

                BIOS-e820: 0000000082c41000 - 0000000082c99000 (usable)

                BIOS-e820: 0000000082c99000 - 000000008318a000 (reserved)

                BIOS-e820: 000000008318a000 - 00000000870fd000 (usable)

                BIOS-e820: 00000000870fd000 - 00000000871d7000 (reserved)

                BIOS-e820: 00000000871d7000 - 0000000087312000 (usable)

                BIOS-e820: 0000000087312000 - 00000000877d4000 (ACPI NVS)

                BIOS-e820: 00000000877d4000 - 0000000087ffe000 (reserved)

                BIOS-e820: 0000000087ffe000 - 0000000087fff000 (usable)

                BIOS-e820: 0000000088000000 - 0000000088100000 (reserved)

                BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

                BIOS-e820: 00000000fe000000 - 00000000fe011000 (reserved)

                BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

                BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

                BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

                BIOS-e820: 0000000100000000 - 0000000472000000 (usable)

                DMI 2.8 present.

                SMBIOS version 2.8 @ 0xF05E0

                DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z170N-WIFI-CF, BIOS FA 07/11/2016

                AMI BIOS detected: BIOS may corrupt low RAM, working around it.

                e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

                e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)

                e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

                last_pfn = 0x472000 max_arch_pfn = 0x400000000

                MTRR default type: write-back

                MTRR fixed ranges enabled:

                  00000-9FFFF write-back

                  A0000-BFFFF uncachable

                  C0000-FFFFF write-protect

                MTRR variable ranges enabled:

                  0 base 00C0000000 mask 7FC0000000 uncachable

                  1 base 00A0000000 mask 7FE0000000 uncachable

                  2 base 0090000000 mask 7FF0000000 uncachable

                  3 base 008C000000 mask 7FFC000000 uncachable

                  4 base 008A000000 mask 7FFE000000 uncachable

                  5 base 0089000000 mask 7FFF000000 uncachable

                  6 base 0088800000 mask 7FFF800000 uncachable

                  7 disabled

                  8 disabled

                  9 disabled

                x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

                last_pfn = 0x87fff max_arch_pfn = 0x400000000

                initial memory mapped : 0 - 20000000

                Using GB pages for direct mapping

                init_memory_mapping: 0000000000000000-0000000087fff000

                0000000000 - 0080000000 page 1G

                0080000000 - 0087e00000 page 2M

                0087e00000 - 0087fff000 page 4k

                kernel direct mapping tables up to 87fff000 @ 10000-13000

                Use unified mapping for non-reserved e820 regions.

                init_memory_mapping: 0000000100000000-0000000472000000

                0100000000 - 0440000000 page 1G

                0440000000 - 0472000000 page 2M

                kernel direct mapping tables up to 472000000 @ 12000-14000

                RAMDISK: 35ac8000 - 36d5b768

                ACPI: RSDP 00000000000f05b0 00024 (v02 ALASKA)

                ACPI: XSDT 00000000877580a8 000CC (v01 ALASKA    A M I 01072009 AMI  00010013)

                ACPI: FACP 000000008777abf8 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)

                ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20090903/tbfadt-288)

                ACPI: DSDT 0000000087758208 229F0 (v02 ALASKA    A M I 01072009 INTL 20120913)

                ACPI: FACS 00000000877d3f80 00040

                ACPI: APIC 000000008777ad08 00084 (v03 ALASKA    A M I 01072009 AMI  00010013)

                ACPI: FPDT 000000008777ad90 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)

                ACPI: FIDT 000000008777add8 0009C (v01 ALASKA    A M I 01072009 AMI  00010013)

                ACPI: MCFG 000000008777ae78 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)

                ACPI: HPET 000000008777aeb8 00038 (v01 ALASKA    A M I 01072009 AMI. 0005000B)

                ACPI: SSDT 000000008777aef0 0036D (v01 SataRe SataTabl 00001000 INTL 20120913)

                ACPI: SSDT 000000008777b260 00490 (v02  Intel PerfTune 00001000 INTL 20120913)

                ACPI: LPIT 000000008777b6f0 00094 (v01 INTEL       SKL 00000000 MSFT 0000005F)

                ACPI: SSDT 000000008777b788 00248 (v02 INTEL  sensrhub 00000000 INTL 20120913)

                ACPI: SSDT 000000008777b9d0 02BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)

                ACPI: SSDT 000000008777e580 00C45 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)

                ACPI: DBGP 000000008777f1c8 00034 (v01 INTEL           00000000 MSFT 0000005F)

                ACPI: DBG2 000000008777f200 00054 (v00 INTEL           00000000 MSFT 0000005F)

                ACPI: SSDT 000000008777f258 01E95 (v02  INTEL xh_rvp10 00000000 INTL 20120913)

                ACPI: SSDT 00000000877810f0 05384 (v02 SaSsdt  SaSsdt  00003000 INTL 20120913)

                ACPI: UEFI 0000000087786478 00042 (v01 ALASKA    A M I 00000000      00000000)

                ACPI: SSDT 00000000877864c0 00E58 (v02 CpuRef  CpuSsdt 00003000 INTL 20120913)

                ACPI: DMAR 0000000087787318 000A8 (v01 INTEL      SKL  00000001 INTL 00000001)

                ACPI: TPM2 00000000877873c0 00034 (v03        Tpm2Tabl 00000001 AMI  00000000)

                ACPI: ASF! 00000000877873f8 000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)

                ACPI: Local APIC address 0xfee00000

                Setting APIC routing to flat.

                No NUMA configuration found

                Faking a node at 0000000000000000-0000000472000000

                Bootmem setup node 0 0000000000000000-0000000472000000

                  NODE_DATA [0000000000013000 - 0000000000046fff]

                  bootmap [0000000000100000 -  000000000018e3ff] pages 8f

                (8 early reservations) ==> bootmem [0000000000 - 0472000000]

                  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]

                  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]

                  #2 [0001000000 - 000202abe4]    TEXT DATA BSS ==> [0001000000 - 000202abe4]

                  #3 [0035ac8000 - 0036d5b768]          RAMDISK ==> [0035ac8000 - 0036d5b768]

                  #4 [000009c800 - 0000100000]    BIOS reserved ==> [000009c800 - 0000100000]

                  #5 [000202b000 - 000202b44f]              BRK ==> [000202b000 - 000202b44f]

                  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]

                  #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]

                found SMP MP-table at [ffff8800000fcb90] fcb90

                Reserving 130MB of memory at 48MB for crashkernel (System RAM: 18208MB)

                [ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800359fffff] on node 0

                [ffffea000ee00000-ffffea000fbfffff] PMD -> [ffff880036e00000-ffff880037bfffff] on node 0

                Zone PFN ranges:

                  DMA      0x00000010 -> 0x00001000

                  DMA32    0x00001000 -> 0x00100000

                  Normal   0x00100000 -> 0x00472000

                Movable zone start PFN for each node

                early_node_map[7] active PFN ranges

                    0: 0x00000010 -> 0x0000009c

                    0: 0x00000100 -> 0x00082c16

                    0: 0x00082c41 -> 0x00082c99

                    0: 0x0008318a -> 0x000870fd

                    0: 0x000871d7 -> 0x00087312

                    0: 0x00087ffe -> 0x00087fff

                    0: 0x00100000 -> 0x00472000

                On node 0 totalpages: 4164777

                  DMA zone: 56 pages used for memmap

                  DMA zone: 105 pages reserved

                  DMA zone: 3819 pages, LIFO batch:0

                  DMA32 zone: 14280 pages used for memmap

                  DMA32 zone: 533845 pages, LIFO batch:31

                  Normal zone: 49392 pages used for memmap

                  Normal zone: 3563280 pages, LIFO batch:31

                ACPI: PM-Timer IO Port: 0x1808

                ACPI: Local APIC address 0xfee00000

                Setting APIC routing to flat.

                ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

                ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

                ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)

                ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)

                ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

                ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

                ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

                ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

                ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

                IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119

                ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

                ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

                ACPI: IRQ0 used by override.

                ACPI: IRQ2 used by override.

                ACPI: IRQ9 used by override.

                Using ACPI (MADT) for SMP configuration information

                ACPI: HPET id: 0x8086a701 base: 0xfed00000

                SMP: Allowing 4 CPUs, 0 hotplug CPUs

                nr_irqs_gsi: 120

                PM: Registered nosave memory: 000000000009c000 - 000000000009d000

                PM: Registered nosave memory: 000000000009d000 - 00000000000a0000

                PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

                PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

                PM: Registered nosave memory: 0000000082c16000 - 0000000082c17000

                PM: Registered nosave memory: 0000000082c17000 - 0000000082c41000

                PM: Registered nosave memory: 0000000082c99000 - 000000008318a000

                PM: Registered nosave memory: 00000000870fd000 - 00000000871d7000

                PM: Registered nosave memory: 0000000087312000 - 00000000877d4000

                PM: Registered nosave memory: 00000000877d4000 - 0000000087ffe000

                PM: Registered nosave memory: 0000000087fff000 - 0000000088000000

                PM: Registered nosave memory: 0000000088000000 - 0000000088100000

                PM: Registered nosave memory: 0000000088100000 - 00000000e0000000

                PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000

                PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000

                PM: Registered nosave memory: 00000000fe000000 - 00000000fe011000

                PM: Registered nosave memory: 00000000fe011000 - 00000000fec00000

                PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000

                PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000

                PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000

                PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000

                PM: Registered nosave memory: 00000000ff000000 - 0000000100000000

                Allocating PCI resources starting at 88100000 (gap: 88100000:57f00000)

                Booting paravirtualized kernel on bare hardware

                Detected CPU family 6 model 94

                UNSUPPORTED HARDWARE DEVICE: Intel CPU model

                ------------[ cut here ]------------

                WARNING: at kernel/rh_taint.c:13 mark_hardware_unsupported+0x34/0x40() (Not tainted)

                Hardware name: To be filled by O.E.M.

                Your hardware is unsupported.  Please do not report bugs, panics, oopses, etc., on this hardware.

                Modules linked in:

                Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff810a7b04>] ? mark_hardware_unsupported+0x34/0x40

                [<ffffffff81c30ba0>] ? setup_arch+0xc46/0xc69

                [<ffffffff815293c5>] ? printk+0x41/0x44

                [<ffffffff81c2ac47>] ? start_kernel+0xdc/0x430

                [<ffffffff81c2a33a>] ? x86_64_start_reservations+0x125/0x129

                [<ffffffff81c2a453>] ? x86_64_start_kernel+0x115/0x124

                ---[ end trace a7919e7f17c0a725 ]---

                NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1

                PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u524288

                pcpu-alloc: s95064 r8192 d23720 u524288 alloc=1*2097152

                pcpu-alloc: [0] 0 1 2 3

                Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4100944

                Policy zone: Normal

                Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-504.el6.x86_64 ro root=UUID=1790d28d-642c-4e06-ac13-9624e84b6240 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=130M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet

                PID hash table entries: 4096 (order: 3, 32768 bytes)

                xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340

                Checking aperture...

                No AGP bridge found

                dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.

                PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

                Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000

                software IO TLB at phys 0x20000000 - 0x24000000

                Memory: 16191924k/18644992k available (5336k kernel code, 1985884k absent, 467184k reserved, 7016k data, 1292k init)

                Hierarchical RCU implementation.

                NR_IRQS:33024 nr_irqs:1024

                Extended CMOS year: 2000

                spurious 8259A interrupt: IRQ7.

                Console: colour VGA+ 80x25

                console [tty0] enabled

                allocated 67108864 bytes of page_cgroup

                please try 'cgroup_disable=memory' option if you don't want memory cgroups

                hpet clockevent registered

                Fast TSC calibration failed

                TSC: Unable to calibrate against PIT

                TSC: using HPET reference calibration

                Detected 3311.998 MHz processor.

                Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.99 BogoMIPS (lpj=3311998)

                pid_max: default: 32768 minimum: 301

                Security Framework initialized

                SELinux:  Initializing.

                SELinux:  Starting in permissive mode

                Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)

                Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)

                Mount-cache hash table entries: 256

                Initializing cgroup subsys ns

                Initializing cgroup subsys cpuacct

                Initializing cgroup subsys memory

                Initializing cgroup subsys devices

                Initializing cgroup subsys freezer

                Initializing cgroup subsys net_cls

                Initializing cgroup subsys blkio

                Initializing cgroup subsys perf_event

                Initializing cgroup subsys net_prio

                CPU: Physical Processor ID: 0

                CPU: Processor Core ID: 0

                mce: CPU supports 10 MCE banks

                CPU0: Thermal monitoring enabled (TM1)

                using mwait in idle threads.

                ACPI: Core revision 20090903

                ftrace: converting mcount calls to 0f 1f 44 00 00

                ftrace: allocating 21917 entries in 86 pages

                dmar: Host address width 39

                dmar: DRHD base: 0x000000fed90000 flags: 0x0

                dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e

                dmar: DRHD base: 0x000000fed91000 flags: 0x1

                dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da

                dmar: RMRR base: 0x00000087139000 end: 0x00000087158fff

                dmar: RMRR base: 0x00000088800000 end: 0x0000008cffffff

                dmar: No ATSR found

                IOAPIC id 2 under DRHD base 0xfed91000

                HPET id 0 under DRHD base 0xfed91000

                Your BIOS is broken and requested that x2apic be disabled.

                This will slightly decrease performance.

                Use 'intremap=no_x2apic_optout' to override BIOS request.

                Enabled IRQ remapping in xapic mode

                x2apic not enabled, IRQ remapping is in xapic mode

                APIC routing finalized to flat.

                  alloc irq_desc for 120 on node 0

                  alloc kstat_irqs on node 0

                  alloc irq_desc for 121 on node 0

                  alloc kstat_irqs on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                alloc irq_2_iommu on node 0

                ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

                CPU0: Intel(R) Core(TM) i5-6600 CPU @ 3.30GHz stepping 03

                Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.

                ... version:                4

                ... bit width:              48

                ... generic registers:      8

                ... value mask:             0000ffffffffffff

                ... max period:             0000ffffffffffff

                ... fixed-purpose events:   3

                ... event mask:             00000007000000ff

                NMI watchdog enabled, takes one hw-pmu counter.

                Booting Node   0, Processors  #1 #2 #3 Ok.

                Brought up 4 CPUs

                Total of 4 processors activated (26495.98 BogoMIPS).

                sizeof(vma)=200 bytes

                sizeof(page)=56 bytes

                sizeof(inode)=592 bytes

                sizeof(dentry)=192 bytes

                sizeof(ext3inode)=800 bytes

                sizeof(buffer_head)=104 bytes

                sizeof(skbuff)=232 bytes

                sizeof(task_struct)=2656 bytes

                devtmpfs: initialized

                PM: Registering ACPI NVS region at 82c16000 (4096 bytes)

                PM: Registering ACPI NVS region at 87312000 (4988928 bytes)

                regulator: core version 0.5

                NET: Registered protocol family 16

                ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

                ACPI: bus type pci registered

                PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

                PCI: MCFG area at e0000000 reserved in E820

                PCI: Using MMCONFIG at e0000000 - efffffff

                PCI: Using configuration type 1 for base access

                bio: create slab <bio-0> at 0

                ACPI: EC: Look up EC in DSDT

                ACPI Error (dswload-0659): [RHUB] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C0] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C1] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C2] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C3] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C4] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [I2C5] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [SPI0] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [SPI1] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [UA00] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [UA01] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [UA02] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI Error (dswload-0659): [\_SB_.PCI0.XHC_.RHUB.SS07] Namespace lookup failure, AE_NOT_FOUND

                ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)

                ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe5e50), AE_NOT_FOUND

                ACPI: Executed 23 blocks of module-level executable AML code

                ACPI: BIOS _OSI(Linux) query ignored

                ACPI: Interpreter enabled

                ACPI: (supports S0 S3 S4 S5)

                ACPI: Using IOAPIC for interrupt routing

                ACPI: Power Resource [PG00] (on)

                ACPI: Power Resource [PG01] (on)

                ACPI: Power Resource [PG02] (on)

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a726 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a727 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a728 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a729 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72a ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72b ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72c ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72d ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72e ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a72f ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a730 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a731 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a732 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a733 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a734 ]---

                ACPI: Power Resource [WRST] (off)

                ------------[ cut here ]------------

                WARNING: at fs/proc/generic.c:599 proc_register+0xb9/0x170() (Tainted: G        W  ---------------   )

                Hardware name: To be filled by O.E.M.

                proc_dir_entry 'power_resource/WRST' already registered

                Modules linked in:

                Pid: 1, comm: swapper Tainted: G        W  ---------------    2.6.32-504.el6.x86_64 #1

                Call Trace:

                [<ffffffff81074df7>] ? warn_slowpath_common+0x87/0xc0

                [<ffffffff81074ee6>] ? warn_slowpath_fmt+0x46/0x50

                [<ffffffff81200299>] ? proc_register+0xb9/0x170

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff812005b6>] ? proc_mkdir+0x16/0x20

                [<ffffffff812f3f10>] ? acpi_power_add+0x142/0x1cd

                [<ffffffff8120c828>] ? sysfs_do_create_link+0xd8/0x170

                [<ffffffff812edea0>] ? acpi_device_probe+0x50/0x122

                [<ffffffff8136c6bc>] ? driver_probe_device+0x9c/0x3e0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136caab>] ? __driver_attach+0xab/0xb0

                [<ffffffff8136ca00>] ? __driver_attach+0x0/0xb0

                [<ffffffff8136b8a4>] ? bus_for_each_dev+0x64/0x90

                [<ffffffff8136c35e>] ? driver_attach+0x1e/0x20

                [<ffffffff8136b0d8>] ? bus_add_driver+0x1e8/0x2b0

                [<ffffffff8136cd06>] ? driver_register+0x76/0x140

                [<ffffffff81200582>] ? proc_mkdir_mode+0x42/0x60

                [<ffffffff81c5ffc9>] ? acpi_init+0x0/0x12f

                [<ffffffff812ef4fd>] ? acpi_bus_register_driver+0x43/0x45

                [<ffffffff81c60734>] ? acpi_power_init+0x4a/0x6c

                [<ffffffff81c600e3>] ? acpi_init+0x11a/0x12f

                [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0

                [<ffffffff81c2a8e4>] ? kernel_init+0x29b/0x2f7

                [<ffffffff8100c20a>] ? child_rip+0xa/0x20

                [<ffffffff81c2a649>] ? kernel_init+0x0/0x2f7

                [<ffffffff8100c200>] ? child_rip+0x0/0x20

                ---[ end trace a7919e7f17c0a735 ]---

                ACPI: Power Resource [WRST] (off)

                ACPI: Power Resource [FN00] (off)

                ACPI: Power Resource [FN01] (off)

                ACPI: Power Resource [FN02] (off)

                ACPI: Power Resource [FN03] (off)

                ACPI: Power Resource [FN04] (off)

                ACPI: No dock devices found.

                PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

                \_SB_.PCI0:_OSC invalid UUID

                _OSC request data:1 8 1f

                ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

                pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]

                pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]

                pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]

                pci_root PNP0A08:00: host bridge window [mem 0x8d000000-0xdfffffff]

                pci_root PNP0A08:00: host bridge window [mem 0xfd000000-0xfe7fffff]

                PCI host bridge to bus 0000:00

                pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]

                pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

                pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

                pci_bus 0000:00: root bus resource [mem 0x8d000000-0xdfffffff]

                pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]

                pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

                pci 0000:00:01.0: PME# disabled

                pci 0000:00:02.0: reg 10: [mem 0xde000000-0xdeffffff 64bit]

                pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]

                pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]

                pci 0000:00:14.0: reg 10: [mem 0xdf330000-0xdf33ffff 64bit]

                pci 0000:00:14.0: PME# supported from D3hot D3cold

                pci 0000:00:14.0: PME# disabled

                pci 0000:00:14.2: reg 10: [mem 0xdf34e000-0xdf34efff 64bit]

                pci 0000:00:16.0: reg 10: [mem 0xdf34d000-0xdf34dfff 64bit]

                pci 0000:00:16.0: PME# supported from D3hot

                pci 0000:00:16.0: PME# disabled

                pci 0000:00:17.0: reg 10: [mem 0xdf348000-0xdf349fff]

                pci 0000:00:17.0: reg 14: [mem 0xdf34c000-0xdf34c0ff]

                pci 0000:00:17.0: reg 18: [io  0xf090-0xf097]

                pci 0000:00:17.0: reg 1c: [io  0xf080-0xf083]

                pci 0000:00:17.0: reg 20: [io  0xf060-0xf07f]

                pci 0000:00:17.0: reg 24: [mem 0xdf34b000-0xdf34b7ff]

                pci 0000:00:17.0: PME# supported from D3hot

                pci 0000:00:17.0: PME# disabled

                pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

                pci 0000:00:1b.0: PME# disabled

                pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

                pci 0000:00:1c.0: PME# disabled

                pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

                pci 0000:00:1c.4: PME# disabled

                pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

                pci 0000:00:1c.5: PME# disabled

                pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

                pci 0000:00:1d.0: PME# disabled

                pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold

                pci 0000:00:1d.4: PME# disabled

                pci 0000:00:1f.2: reg 10: [mem 0xdf344000-0xdf347fff]

                pci 0000:00:1f.3: reg 10: [mem 0xdf340000-0xdf343fff 64bit]

                pci 0000:00:1f.3: reg 20: [mem 0xdf320000-0xdf32ffff 64bit]

                pci 0000:00:1f.3: PME# supported from D3hot D3cold

                pci 0000:00:1f.3: PME# disabled

                pci 0000:00:1f.4: reg 10: [mem 0xdf34a000-0xdf34a0ff 64bit]

                pci 0000:00:1f.4: reg 20: [io  0xf040-0xf05f]

                pci 0000:00:1f.6: reg 10: [mem 0xdf300000-0xdf31ffff]

                pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold

                pci 0000:00:1f.6: PME# disabled

                pci 0000:01:00.0: reg 10: [mem 0xdf201000-0xdf201fff]

                pci 0000:01:00.0: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.1: reg 10: [mem 0xdf200000-0xdf200fff]

                pci 0000:01:00.1: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:00:01.0: PCI bridge to [bus 01-01]

                pci 0000:00:01.0:   bridge window [mem 0xdf200000-0xdf2fffff]

                pci 0000:00:1b.0: PCI bridge to [bus 02-02]

                pci 0000:00:1c.0: PCI bridge to [bus 03-03]

                pci 0000:04:00.0: reg 10: [mem 0xdf100000-0xdf11ffff]

                pci 0000:04:00.0: reg 18: [io  0xe000-0xe01f]

                pci 0000:04:00.0: reg 1c: [mem 0xdf120000-0xdf123fff]

                pci 0000:04:00.0: PME# supported from D0 D3hot D3cold

                pci 0000:04:00.0: PME# disabled

                pci 0000:00:1c.4: PCI bridge to [bus 04-04]

                pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]

                pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]

                pci 0000:05:00.0: reg 10: [mem 0xdf000000-0xdf001fff 64bit]

                pci 0000:05:00.0: PME# supported from D0 D3hot D3cold

                pci 0000:05:00.0: PME# disabled

                pci 0000:00:1c.5: PCI bridge to [bus 05-05]

                pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]

                pci 0000:00:1d.0: PCI bridge to [bus 06-06]

                pci 0000:00:1d.4: PCI bridge to [bus 07-07]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP09._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP13._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]

                ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP17._PRT]

                \_SB_.PCI0:_OSC invalid UUID

                _OSC request data:1 1f 1f

                pci0000:00: Requesting ACPI _OSC control (0x1d)

                \_SB_.PCI0:_OSC invalid UUID

                _OSC request data:1 0 1d

                Unable to assume _OSC PCIe control. Disabling ASPM

                ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)

                ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)

                ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)

                ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)

                ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)

                ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)

                ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)

                ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)

                vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

                vgaarb: loaded

                vgaarb: bridge control possible 0000:00:02.0

                SCSI subsystem initialized

                libata version 3.00 loaded.

                usbcore: registered new interface driver usbfs

                usbcore: registered new interface driver hub

                usbcore: registered new device driver usb

                PCI: Using ACPI for IRQ routing

                PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64

                PCI: pci_cache_line_size set to 64 bytes

                NetLabel: Initializing

                NetLabel:  domain hash size = 128

                NetLabel:  protocols = UNLABELED CIPSOv4

                NetLabel:  unlabeled traffic allowed by default

                  alloc irq_desc for 122 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                  alloc irq_desc for 123 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                  alloc irq_desc for 124 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                  alloc irq_desc for 125 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                HPET: 8 timers in total, 4 timers will be used for per-cpu timer

                hpet0: at MMIO 0xfed00000, IRQs 2, 8, 122, 123, 124, 125, 0, 0

                hpet0: 8 comparators, 64-bit 24.000000 MHz counter

                hpet: hpet2 irq 122 for MSI

                hpet: hpet3 irq 123 for MSI

                hpet: hpet4 irq 124 for MSI

                hpet: hpet5 irq 125 for MSI

                Switching to clocksource hpet

                pnp: PnP ACPI init

                ACPI: bus type pnp registered

                pnp 00:00: [io  0x0cf8-0x0cff]

                pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)

                pnp 00:01: [io  0x0000-0xffffffffffffffff disabled]

                pnp 00:01: [io  0x0a00-0x0a2f]

                pnp 00:01: [io  0x0a30-0x0a3f]

                pnp 00:01: [io  0x0a40-0x0a4f]

                pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp 00:02: [mem 0xff000000-0xffffffff]

                pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)

                pnp 00:03: [mem 0xfed00000-0xfed003ff]

                pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)

                pnp 00:04: [io  0x00f0]

                pnp 00:04: [irq 13]

                pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)

                pnp 00:05: [io  0x002e-0x002f]

                pnp 00:05: [io  0x004e-0x004f]

                pnp 00:05: [io  0x0061]

                pnp 00:05: [io  0x0063]

                pnp 00:05: [io  0x0065]

                pnp 00:05: [io  0x0067]

                pnp 00:05: [io  0x0070]

                pnp 00:05: [io  0x0080]

                pnp 00:05: [io  0x0092]

                pnp 00:05: [io  0x00b2-0x00b3]

                pnp 00:05: [io  0x0680-0x069f]

                pnp 00:05: [io  0xffff]

                pnp 00:05: [io  0xffff]

                pnp 00:05: [io  0xffff]

                pnp 00:05: [io  0x1800-0x18fe]

                pnp 00:05: [io  0x164e-0x164f]

                pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp 00:06: [io  0x0800-0x087f]

                pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp 00:07: [io  0x0070-0x0077]

                pnp 00:07: [irq 8]

                pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)

                pnp 00:08: [io  0x1854-0x1857]

                pnp 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

                pnp 00:09: [mem 0xfed10000-0xfed17fff]

                pnp 00:09: [mem 0xfed18000-0xfed18fff]

                pnp 00:09: [mem 0xfed19000-0xfed19fff]

                pnp 00:09: [mem 0xe0000000-0xefffffff]

                pnp 00:09: [mem 0xfed20000-0xfed3ffff]

                pnp 00:09: [mem 0xfed90000-0xfed93fff]

                pnp 00:09: [mem 0xfed45000-0xfed8ffff]

                pnp 00:09: [mem 0xff000000-0xffffffff]

                pnp 00:09: [mem 0xfee00000-0xfeefffff]

                pnp 00:09: [mem 0xdffe0000-0xdfffffff]

                pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]

                pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp 00:0a: [mem 0xfd000000-0xfdabffff]

                pnp 00:0a: [mem 0xfdad0000-0xfdadffff]

                pnp 00:0a: [mem 0xfdb00000-0xfdffffff]

                pnp 00:0a: [mem 0xfe000000-0xfe01ffff]

                pnp 00:0a: [mem 0xfe036000-0xfe03bfff]

                pnp 00:0a: [mem 0xfe03d000-0xfe3fffff]

                pnp 00:0a: [mem 0xfe410000-0xfe7fffff]

                pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp 00:0b: [mem 0xfdaf0000-0xfdafffff]

                pnp 00:0b: [mem 0xfdae0000-0xfdaeffff]

                pnp 00:0b: [mem 0xfdac0000-0xfdacffff]

                pnp 00:0b: IRQ 14 override to edge, high

                pnp 00:0b: [irq 14]

                pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)

                pnp: PnP ACPI: found 12 devices

                ACPI: ACPI bus type pnp unregistered

                system 00:01: [io  0x0a00-0x0a2f] has been reserved

                system 00:01: [io  0x0a30-0x0a3f] has been reserved

                system 00:01: [io  0x0a40-0x0a4f] has been reserved

                system 00:05: [io  0x0680-0x069f] has been reserved

                system 00:05: [io  0xffff] has been reserved

                system 00:05: [io  0xffff] has been reserved

                system 00:05: [io  0xffff] has been reserved

                system 00:05: [io  0x1800-0x18fe] has been reserved

                system 00:05: [io  0x164e-0x164f] has been reserved

                system 00:06: [io  0x0800-0x087f] has been reserved

                system 00:08: [io  0x1854-0x1857] has been reserved

                system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved

                system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved

                system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved

                system 00:09: [mem 0xe0000000-0xefffffff] has been reserved

                system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved

                system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved

                system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved

                system 00:09: [mem 0xff000000-0xffffffff] has been reserved

                system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved

                system 00:09: [mem 0xdffe0000-0xdfffffff] has been reserved

                system 00:0a: [mem 0xfd000000-0xfdabffff] has been reserved

                system 00:0a: [mem 0xfdad0000-0xfdadffff] has been reserved

                system 00:0a: [mem 0xfdb00000-0xfdffffff] has been reserved

                system 00:0a: [mem 0xfe000000-0xfe01ffff] could not be reserved

                system 00:0a: [mem 0xfe036000-0xfe03bfff] has been reserved

                system 00:0a: [mem 0xfe03d000-0xfe3fffff] has been reserved

                system 00:0a: [mem 0xfe410000-0xfe7fffff] has been reserved

                system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved

                system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved

                system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved

                pci 0000:01:00.0: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.1: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.0: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.0: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.0: BAR 7: assigned [mem 0xdf202000-0xdf205fff]

                pci 0000:01:00.0: BAR 7: set to [mem 0xdf202000-0xdf205fff] (PCI address [0xdf202000-0xdf205fff]

                pci 0000:01:00.1: reg 224: [mem 0x00000000-0x00000fff]

                pci 0000:01:00.1: BAR 7: assigned [mem 0xdf206000-0xdf207fff]

                pci 0000:01:00.1: BAR 7: set to [mem 0xdf206000-0xdf207fff] (PCI address [0xdf206000-0xdf207fff]

                pci 0000:00:01.0: PCI bridge to [bus 01-01]

                pci 0000:00:01.0:   bridge window [mem 0xdf200000-0xdf2fffff]

                pci 0000:00:1b.0: PCI bridge to [bus 02-02]

                pci 0000:00:1c.0: PCI bridge to [bus 03-03]

                pci 0000:00:1c.4: PCI bridge to [bus 04-04]

                pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]

                pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]

                pci 0000:00:1c.5: PCI bridge to [bus 05-05]

                pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]

                pci 0000:00:1d.0: PCI bridge to [bus 06-06]

                pci 0000:00:1d.4: PCI bridge to [bus 07-07]

                pci 0000:00:01.0: power state changed by ACPI to D0

                pci 0000:00:01.0: power state changed by ACPI to D0

                  alloc irq_desc for 16 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:01.0: setting latency timer to 64

                pci 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:1b.0: setting latency timer to 64

                pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:1c.0: setting latency timer to 64

                pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:1c.4: setting latency timer to 64

                  alloc irq_desc for 17 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17

                pci 0000:00:1c.5: setting latency timer to 64

                pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:1d.0: setting latency timer to 64

                pci 0000:00:1d.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:1d.4: setting latency timer to 64

                pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]

                pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]

                pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

                pci_bus 0000:00: resource 7 [mem 0x8d000000-0xdfffffff]

                pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]

                pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]

                pci_bus 0000:04: resource 0 [io  0xe000-0xefff]

                pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]

                pci_bus 0000:05: resource 1 [mem 0xdf000000-0xdf0fffff]

                NET: Registered protocol family 2

                IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)

                TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

                TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

                TCP: Hash tables configured (established 524288 bind 65536)

                TCP reno registered

                NET: Registered protocol family 1

                pci 0000:00:02.0: Boot video device

                pci 0000:00:14.0: power state changed by ACPI to D0

                pci 0000:00:14.0: power state changed by ACPI to D0

                pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                pci 0000:00:14.0: PCI INT A disabled

                Trying to unpack rootfs image as initramfs...

                Freeing initrd memory: 19021k freed

                futex hash table entries: 1024 (order: 4, 65536 bytes)

                audit: initializing netlink socket (disabled)

                type=2000 audit(1487658341.374:1): initialized

                HugeTLB registered 2 MB page size, pre-allocated 0 pages

                VFS: Disk quotas dquot_6.5.2

                Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

                msgmni has been set to 31662

                SELinux:  Registering netfilter hooks

                alg: No test for stdrng (krng)

                ksign: Installing public key data

                Loading keyring

                - Added public key FEBCF26ABFDA92DD

                - User ID: CentOS (Kernel Module GPG key)

                Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

                io scheduler noop registered

                io scheduler anticipatory registered

                io scheduler deadline registered

                io scheduler cfq registered (default)

                pcieport 0000:00:01.0: setting latency timer to 64

                  alloc irq_desc for 126 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                pcieport 0000:00:01.0: irq 126 for MSI/MSI-X

                pci_hotplug: PCI Hot Plug PCI Core version: 0.5

                pciehp: PCI Express Hot Plug Controller Driver version: 0.4

                acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

                acpiphp: Slot [1] registered

                acpiphp: Slot [1-1] registered

                acpiphp: Slot [1-2] registered

                intel_idle: MWAIT substates: 0x142120

                intel_idle: does not run on family 6 model 94

                input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0

                ACPI: Sleep Button [SLPB]

                input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

                ACPI: Power Button [PWRB]

                input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

                ACPI: Power Button [PWRF]

                ACPI: Fan [FAN0] (off)

                ACPI: Fan [FAN1] (off)

                ACPI: Fan [FAN2] (off)

                ACPI: Fan [FAN3] (off)

                ACPI: Fan [FAN4] (off)

                ACPI: acpi_idle registered with cpuidle

                ACPI: SSDT 0000000087132c18 0037F (v02  PmRef  Cpu0Cst 00003001 INTL 20120913)

                ACPI: SSDT 0000000087133718 006C3 (v02  PmRef  Cpu0Ist 00003000 INTL 20120913)

                Monitor-Mwait will be used to enter C-1 state

                Monitor-Mwait will be used to enter C-2 state

                Monitor-Mwait will be used to enter C-3 state

                ACPI: SSDT 0000000087132618 005AA (v02  PmRef    ApIst 00003000 INTL 20120913)

                ACPI: SSDT 0000000087135c18 00119 (v02  PmRef    ApCst 00003000 INTL 20120913)

                [Firmware Bug]: No valid trip found

                thermal LNXTHERM:01: registered as thermal_zone0

                ACPI: Thermal Zone [TZ00] (28 C)

                thermal LNXTHERM:02: registered as thermal_zone1

                ACPI: Thermal Zone [TZ01] (30 C)

                GHES: HEST is not enabled!

                Non-volatile memory driver v1.3

                Linux agpgart interface v0.103

                crash memory driver: version 1.1

                Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

                brd: module loaded

                loop: module loaded

                input: Macintosh mouse button emulation as /devices/virtual/input/input3

                Fixed MDIO Bus: probed

                ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

                ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

                uhci_hcd: USB Universal Host Controller Interface driver

                PNP: No PS/2 controller found. Probing ports directly.

                serio: i8042 KBD port at 0x60,0x64 irq 1

                serio: i8042 AUX port at 0x60,0x64 irq 12

                mice: PS/2 mouse device common for all mice

                rtc_cmos 00:07: RTC can wake from S4

                rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0

                rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

                cpuidle: using governor ladder

                cpuidle: using governor menu

                EFI Variables Facility v0.08 2004-May-17

                usbcore: registered new interface driver hiddev

                usbcore: registered new interface driver usbhid

                usbhid: v2.6:USB HID core driver

                GRE over IPv4 demultiplexor driver

                TCP cubic registered

                Initializing XFRM netlink socket

                NET: Registered protocol family 17

                registered taskstats version 1

                rtc_cmos 00:07: setting system clock to 2017-02-21 06:25:42 UTC (1487658342)

                Initalizing network drop monitor service

                Freeing unused kernel memory: 1292k freed

                Write protecting the kernel read-only data: 10240k

                Freeing unused kernel memory: 788k freed

                Freeing unused kernel memory: 1568k freed

                dracut: dracut-004-356.el6

                dracut: rd_NO_LUKS: removing cryptoluks activation

                dracut: rd_NO_LVM: removing LVM activation

                device-mapper: uevent: version 1.0.3

                device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com

                udev: starting version 147

                dracut: Starting plymouth daemon

                dracut: rd_NO_DM: removing DM RAID activation

                dracut: rd_NO_MD: removing MD RAID activation

                xhci_hcd 0000:00:14.0: power state changed by ACPI to D0

                xhci_hcd 0000:00:14.0: power state changed by ACPI to D0

                xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                xhci_hcd 0000:00:14.0: setting latency timer to 64

                xhci_hcd 0000:00:14.0: xHCI Host Controller

                xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

                xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

                  alloc irq_desc for 127 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                xhci_hcd 0000:00:14.0: irq 127 for MSI/MSI-X

                usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

                usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                usb usb1: Product: xHCI Host Controller

                usb usb1: Manufacturer: Linux 2.6.32-504.el6.x86_64 xhci_hcd

                usb usb1: SerialNumber: 0000:00:14.0

                usb usb1: configuration #1 chosen from 1 choice

                hub 1-0:1.0: USB hub found

                hub 1-0:1.0: 16 ports detected

                xhci_hcd 0000:00:14.0: xHCI Host Controller

                xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

                usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor

                usb usb2: New USB device found, idVendor=1d6b, idProduct=0003

                usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                usb usb2: Product: xHCI Host Controller

                usb usb2: Manufacturer: Linux 2.6.32-504.el6.x86_64 xhci_hcd

                usb usb2: SerialNumber: 0000:00:14.0

                usb usb2: configuration #1 chosen from 1 choice

                hub 2-0:1.0: USB hub found

                hub 2-0:1.0: 10 ports detected

                ahci 0000:00:17.0: version 3.0

                ahci 0000:00:17.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                  alloc irq_desc for 128 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                ahci 0000:00:17.0: irq 128 for MSI/MSI-X

                ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode

                ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems apst

                ahci 0000:00:17.0: setting latency timer to 64

                scsi0 : ahci

                scsi1 : ahci

                scsi2 : ahci

                scsi3 : ahci

                scsi4 : ahci

                scsi5 : ahci

                ata1: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b100 irq 128

                ata2: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b180 irq 128

                ata3: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b200 irq 128

                ata4: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b280 irq 128

                ata5: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b300 irq 128

                ata6: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b380 irq 128

                ata1: SATA link down (SStatus 4 SControl 300)

                ata2: SATA link down (SStatus 4 SControl 300)

                ata5: SATA link down (SStatus 4 SControl 300)

                ata3: SATA link down (SStatus 4 SControl 300)

                ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

                ata6: SATA link down (SStatus 4 SControl 300)

                ata4.00: ACPI _SDD failed (AE 0x5)

                usb 1-3: new low speed USB device number 2 using xhci_hcd

                usb 1-3: New USB device found, idVendor=192f, idProduct=0616

                usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0

                usb 1-3: Product: USB Optical Mouse

                usb 1-3: configuration #1 chosen from 1 choice

                usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes

                input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input4

                generic-usb 0003:192F:0616.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0

                usb 1-4: new full speed USB device number 3 using xhci_hcd

                Refined TSC clocksource calibration: 3312.003 MHz.

                Switching to clocksource tsc

                usb 1-4: New USB device found, idVendor=413c, idProduct=1003

                usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

                usb 1-4: Product: Dell USB Keyboard Hub

                usb 1-4: Manufacturer: Dell

                usb 1-4: configuration #1 chosen from 1 choice

                usb 1-4: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes

                hub 1-4:1.0: USB hub found

                hub 1-4:1.0: 3 ports detected

                usb 1-8: new full speed USB device number 4 using xhci_hcd

                usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b

                usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0

                usb 1-8: configuration #1 chosen from 1 choice

                usb 1-4.1: new full speed USB device number 5 using xhci_hcd

                usb 1-4.1: New USB device found, idVendor=413c, idProduct=2010

                usb 1-4.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0

                usb 1-4.1: Product: Dell USB Keyboard

                usb 1-4.1: Manufacturer: Dell

                usb 1-4.1: configuration #1 chosen from 1 choice

                usb 1-4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes

                usb 1-4.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes

                input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/input/input5

                generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-4.1/input0

                input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/input/input6

                generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:14.0-4.1/input1

                ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

                ata4.00: ACPI _SDD failed (AE 0x5)

                ata4.00: ACPI: failed the second time, disabled

                ata4.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133

                ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)

                ata4.00: configured for UDMA/133

                scsi 3:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5

                ACPI: WMI: Mapper loaded

                STARTING CRC_T10DIF

                sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)

                sd 3:0:0:0: [sda] 4096-byte physical blocks

                sd 3:0:0:0: [sda] Write Protect is off

                sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

                sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

                sda: sda1 sda2 sda3 sda4 sda5

                sd 3:0:0:0: [sda] Attached SCSI disk

                EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:

                dracut: Mounted root filesystem /dev/sda1

                dracut: Loading SELinux policy

                type=1404 audit(1487658349.098:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

                SELinux: 2048 avtab hash slots, 294585 rules.

                SELinux: 2048 avtab hash slots, 294585 rules.

                SELinux:  9 users, 12 roles, 4142 types, 228 bools, 1 sens, 1024 cats

                SELinux:  81 classes, 294585 rules

                SELinux:  Completing initialization.

                SELinux:  Setting up existing superblocks.

                SELinux: initialized (dev sda1, type ext4), uses xattr

                SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts

                SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

                SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

                SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

                SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs

                SELinux: initialized (dev devpts, type devpts), uses transition SIDs

                SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts

                SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts

                SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

                SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

                SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

                SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs

                SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

                SELinux: initialized (dev proc, type proc), uses genfs_contexts

                SELinux: initialized (dev bdev, type bdev), uses genfs_contexts

                SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

                SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

                type=1403 audit(1487658349.512:3): policy loaded auid=4294967295 ses=4294967295

                dracut:

                dracut: Switching root

                udev: starting version 147

                shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

                Bluetooth: Core ver 2.15

                NET: Registered protocol family 31

                Bluetooth: HCI device and connection manager initialized

                Bluetooth: HCI socket layer initialized

                Bluetooth: Generic Bluetooth USB driver ver 0.6

                usbcore: registered new interface driver btusb

                sd 3:0:0:0: Attached scsi generic sg0 type 0

                pps_core: LinuxPPS API ver. 1 registered

                pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

                PTP clock support registered

                dca service started, version 1.12.1

                igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k

                igb: Copyright (c) 2007-2014 Intel Corporation.

                igb 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                igb 0000:04:00.0: setting latency timer to 64

                  alloc irq_desc for 129 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                igb 0000:04:00.0: irq 129 for MSI/MSI-X

                  alloc irq_desc for 130 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                igb 0000:04:00.0: irq 130 for MSI/MSI-X

                  alloc irq_desc for 131 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                igb 0000:04:00.0: irq 131 for MSI/MSI-X

                  alloc irq_desc for 132 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                igb 0000:04:00.0: irq 132 for MSI/MSI-X

                  alloc irq_desc for 133 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                igb 0000:04:00.0: irq 133 for MSI/MSI-X

                igb 0000:04:00.0: added PHC on eth0

                igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection

                igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 1c:1b:0d:6a:25:eb

                igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF

                igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)

                snd_hda_intel 0000:00:1f.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16

                  alloc irq_desc for 134 on node -1

                  alloc kstat_irqs on node -1

                alloc irq_2_iommu on node -1

                snd_hda_intel 0000:00:1f.3: irq 134 for MSI/MSI-X

                hda_codec: ALC1150: SKU not ready 0x00000000

                input: HDA Intel HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7

                input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8

                input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

                input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10

                input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11

                input: HDA Intel Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

                input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13

                input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14

                microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x74

                platform microcode: firmware: requesting intel-ucode/06-5e-03

                udev: renamed network interface eth0 to eth3

                microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x74

                platform microcode: firmware: requesting intel-ucode/06-5e-03

                microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x74

                platform microcode: firmware: requesting intel-ucode/06-5e-03

                microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x74

                platform microcode: firmware: requesting intel-ucode/06-5e-03

                Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

                tun: Universal TUN/TAP device driver, 1.6

                tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

                Adding 16383996k swap on /dev/sda2.  Priority:-1 extents:1 across:16383996k

                SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

                NET: Registered protocol family 10

                lo: Disabled Privacy Extensions

                ip6_tables: (C) 2000-2006 Netfilter Core Team

                nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

                ip_tables: (C) 2000-2006 Netfilter Core Team

                type=1305 audit(1487658358.237:4): audit_pid=1911 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1

                802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

                All bugs added by David S. Miller <davem@redhat.com>

                ADDRCONF(NETDEV_UP): eth3: link is not ready

                8021q: adding VLAN 0 to HW filter on device eth3

                igb 0000:04:00.0: eth3: igb: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX

                ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready

                SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

                SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

                SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

                Bluetooth: L2CAP ver 2.14

                Bluetooth: L2CAP socket layer initialized

                Bluetooth: BNEP (Ethernet Emulation) ver 1.3

                Bluetooth: BNEP filters: protocol multicast

                Bridge firewalling registered

                Bluetooth: SCO (Voice Link) ver 0.6

                Bluetooth: SCO socket layer initialized

                device virbr0-nic entered promiscuous mode

                virbr0: starting userspace STP failed, starting kernel STP

                Ebtables v2.0 registered

                [drm] Initialized drm 1.1.0 20060810

                SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

                SELinux: initialized (dev proc, type proc), uses genfs_contexts

                SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

                lo: Disabled Privacy Extensions

                SELinux: initialized (dev proc, type proc), uses genfs_contexts

                eth3: no IPv6 routers present

                fuse init (API version 7.14)

                hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

                pci 0000:01:08.0: unknown header type 7f, ignoring device

                pci 0000:01:08.1: unknown header type 7f, ignoring device

                pci 0000:01:08.2: unknown header type 7f, ignoring device

                pci 0000:01:08.3: unknown header type 7f, ignoring device

                Base hw val DF201000

                Base hw len 4096

                Virt hw val 125AC000

                irq: 0

                xpcie: Init:  Initialize Hardware Done..

                xpcie: Init: module registered

                xpcie driver is loaded

                • 5. Re: SR-IOV support for Z170 and I5-6600
                  Intel Corporation
                  This message was posted on behalf of Intel Corporation

                  Thanks for your reply, please allow me to find the best support for you.
                   
                   
                  Ivan.
                   

                  • 6. Re: SR-IOV support for Z170 and I5-6600
                    Intel Corporation
                    This message was posted on behalf of Intel Corporation

                    Hello yn123abc ,
                     
                    After doing some investigation, most likely reason for this to happen is if the motherboard does not support SR-IOV since it is a client platform (vs. Server platform).
                     
                    We are not familiar with that motherboard – it is strongly suggested that you checks with the motherboard manufacturer to see what the Ethernet is on it, since most likely does not support SR-IOV, thus the error.
                     
                     
                    Best regards,
                     
                     
                    Ivan.
                     

                    • 7. Re: SR-IOV support for Z170 and I5-6600
                      yn123abc

                      This is a FPGA PCIe card. It's
                      inserted to the motherboard PCIe slot. The SR-IOV function worked well when
                      it’s inserted in an E3/X79 platform. As I know, the PCIe lanes connect with CPU
                      directly. And the CPU can support VT-X/VT-D. So I think it’s only related with
                      CPU. If there is any setting needed for I5-6600/Z170 to support SR-IOV? Have
                      this platform tested SR-IOV?   

                      • 8. Re: SR-IOV support for Z170 and I5-6600
                        Intel Corporation
                        This message was posted on behalf of Intel Corporation

                        Ok, let me find out for you.

                        Thank you,

                        Ivan.

                        • 9. Re: SR-IOV support for Z170 and I5-6600
                          Intel Corporation
                          This message was posted on behalf of Intel Corporation

                          After further review, your best contact support is with your motherboard manufacturer, we have check on this and most likely reason for this to happen is if the motherboard does not support SR-IOV since it is a client platform.
                           
                          It is strongly suggested that you check with the motherboard manufacturer to see what the Ethernet is on it, since most likely does not support SR-IOV, thus the error.
                           
                           
                          Best regards,
                           
                           
                          Ivan.