7 Replies Latest reply on Apr 12, 2017 9:16 AM by Intel Corporation Branched to a new discussion.

    igb Detected Tx Unit Hang

    BlackBargin

      Hi all experts :

       

      we are using the Intel I350AM2 ( Two GE Ports ) chip to interface the Cortex-A8 SoC from TI through PCIE x 2 bus .

      The OS version is Linux 2.6.37

      The I350 driver version is 5.0.6

      and after some hours , we found the log as below with GDB backtrace info.

       

      igb 0000:01:00.0: Detected Tx Unit Hang

        Tx Queue             <0>

        TDH                  <c9>

        TDT                  <c9>

        next_to_use          <c9>

        next_to_clean        <de>

      buffer_info[next_to_clean]

        time_stamp           <91811>

        next_to_watch        <ffc17df0>

        jiffies              <91b40>

        desc.status          <1568200>

      ------------[ cut here ]------------

      WARNING: at net/sched/sch_generic.c:258 dev_watchdog+0x148/0x230()

      NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out

      Modules linked in: aur5g8ke_face_lcd avst_digit_audio ti81xxhdmi ti81xxfb vpss osa_kermod syslink

      Backtrace:

      [<c004cfac>] (dump_backtrace+0x0/0x110) from [<c033900c>] (dump_stack+0x18/0x1c)

      r6:c042b298 r5:00000102 r4:c0457df0 r3:60000113

      [<c0338ff4>] (dump_stack+0x0/0x1c) from [<c0072910>] (warn_slowpath_common+0x54/0x6c)

      [<c00728bc>] (warn_slowpath_common+0x0/0x6c) from [<c00729cc>] (warn_slowpath_fmt+0x38/0x40)

      r8:c02c78bc r7:00000100 r6:00000000 r5:c04cb59c r4:cdc0c000

      r3:00000009

      [<c0072994>] (warn_slowpath_fmt+0x0/0x40) from [<c02c7a04>] (dev_watchdog+0x148/0x230)

      r3:cdc0c000 r2:c042b2b0

      [<c02c78bc>] (dev_watchdog+0x0/0x230) from [<c007cc1c>] (run_timer_softirq+0x130/0x1c8)

      r6:00000100 r5:c0456000 r4:c04b7c40

      [<c007caec>] (run_timer_softirq+0x0/0x1c8) from [<c00777b4>] (__do_softirq+0x84/0x114)

      [<c0077730>] (__do_softirq+0x0/0x114) from [<c0077ba4>] (irq_exit+0x48/0x98)

      [<c0077b5c>] (irq_exit+0x0/0x98) from [<c003f07c>] (asm_do_IRQ+0x7c/0x9c)

      [<c003f000>] (asm_do_IRQ+0x0/0x9c) from [<c033aff4>] (__irq_svc+0x34/0xa0)

      Exception stack(0xc0457f18 to 0xc0457f60)

      7f00:                                                       c0496610 00000002

      7f20: cbaa8000 5efe1920 cbaa801c c0459040 00000015 c982f8c0 ccd24300 413fc082

      7f40: ccd24300 c0457f6c c0457f70 c0457f60 c033b460 c033d01c 60000013 ffffffff

      r5:fa200000 r4:ffffffff

      [<c033d010>] (atomic_notifier_call_chain+0x0/0x28) from [<c033b460>] (__switch_to+0x2c/0x4c)

      [<c0339564>] (schedule+0x0/0x304) from [<c004a69c>] (cpu_idle+0x80/0x90)

      [<c004a61c>] (cpu_idle+0x0/0x90) from [<c032d8dc>] (rest_init+0x60/0x78)

      r6:c06d0900 r5:c002dd50 r4:c04babbc r3:00000000

      [<c032d87c>] (rest_init+0x0/0x78) from [<c0008c08>] (start_kernel+0x264/0x2b8)

      [<c00089a4>] (start_kernel+0x0/0x2b8) from [<80008048>] (0x80008048)

      ---[ end trace bb79dcc8c86613b8 ]---

       

       

       

       

       

      we have tried to disable the offload option as below but not work , the I350AM2 still hang , btw , we only use the eth0 port now .

       

      Offload parameters for eth0:

      rx-checksumming: on

      tx-checksumming: on

      scatter-gather: off

      tcp-segmentation-offload: off

      udp-fragmentation-offload: off

      generic-segmentation-offload: off

      generic-receive-offload: off

      large-receive-offload: off

      rx-vlan-offload: on

      tx-vlan-offload: on

      ntuple-filters: off

      receive-hashing: on

       

       

      is there any suggestions on this case ?