cancel
Showing results for 
Search instead for 
Did you mean: 

x25m- "raid not supported" message in toolbox?

idata
Esteemed Contributor III

I successfully updated the firmware using the tool of intel's site. followed the instructions & it confirmed the drive & after restart... the new firmware update. here's the thing - both before & after the update- the toolbox buttons will not work. & it posts a message "raid not supported" just to the right of the '74.5 gig' drive size. but I don't have a raid array??? any fixes for this?

3 REPLIES 3

idata
Esteemed Contributor III

maybe RAID option was enabled in the Bios?? you might want to check on that.

idata
Esteemed Contributor III

No... actually raid was disabled. it was in IDE mode. I tried switching to AHCI & then uninstalling & re-installing the toolbox... no avail.

idata
Esteemed Contributor III

oh.. by the by... I'm running an i5 cpu, 4 gigs ram, asus p7p55d motherboard. in the bios there is a setting for raid/AHCI/ide. I already had it set to ide. called intel support, they said that ahci was preferred, but that ide should work. so I tried setting it to ahci.