4 Replies Latest reply on Feb 13, 2017 11:56 AM by Intel Corporation

    Need mrra SPI CS ("Chip Select") configured to "active high"

    floydg

      There does not appear to be an MRAA API call to configure the SPI Chip Select to: "active high". T

      The default for Chip Select is active low (~Enable - as shown below).

       

      Note: MISO was not connected (floating)

       

      Configuration:

      570X

      BIOS 161

      Ostro 12/2016

       

      SPI 1:

      Bus 0 MOSI = 4 MISO = 2 CS = 6 CLK = 10

       

       

      SpiDev Documentation

      Member:

      cshigh Description: Property that gets / sets if the CS is active high.

       

      Is there another clean way to set "Chip Select" for SPI to be "active high"?