2 Replies Latest reply on Feb 9, 2017 3:41 PM by Intel Corporation

    SR300 Installation error on linux ubuntu 14.04.05 LTS


      Board : TK1 Board

      OS : linux ubuntu 14.04

      I learned about installation in GitHub - IntelRealSense/librealsense: Cross-platform camera capture for Intel® RealSense™ F200, SR300 and R200


      linux installation -> Video4Linux backend ->

      • sudo cp config/99-realsense-libusb.rules /etc/udev/rules.d/
      • sudo udevadm control --reload-rules && udevadm trigger
      • /scripts/patch-uvcvideo-16.04.simple.sh
        • sudo modprobe uvcvideo
        • sudo dmesg | tail -n 50

      and i finished.



      but i remember that glfw3 error.

      So "sudo apt-get update && sudo apt-get dist-upgrade"

      sudo apt-get install libsub-1.0-0-dev pkg-config




      Of course, i installed qtcreator and cmaker.



      Finally, i input "./cpp-alignimages.cpp"

      but display 1 screen of 4screen.

      Only RGB screen on left upper No depth screen.

      Other files too.



      I will format my board. How can i solve this problem?@