Hi what happens if you boot up without the mouse or keyboard connected, can you try to see?
I tried it but still the same status.
I tried unpluging the HDD, RAM, Keyboard, mouse.. but nothing happens. All the hardware dives seems to work fine.
Any other ideas please
very odd becasue post 94 is for keyboard input buffer or somethin...
what happens if oyu boot into maintenance mode?
also try a clear cmos and update bios via recovery, i dont think it will fix anything as such, but sometime cangive the board a little push shall we say...
What do you mean by maintenance mode?? :S
There is a jumper on the motehrboard calle bios config, it is usually in position 1-2 if you put it in in 2-3 the system will boot up into maintennace mode in BIOS. If you remove the jumper completly you are preparing the board for a BIOS recovery update
i think you got my D946gzis brothers..
pls .. take out your coin battery and go and have a 15 min water break or jog or watch tv..
then come back after 15 .. insert the battery .. fire up the system with Processor, Mainboard and ram..
do not connect HDD and ODD.
pls plug out all cables and use PS/2 keyboard..
if you have a grafic card.. plug out that and use the onboard for disnoistic
i did as Cpt.Dogfruit and removed the battery took a small break and now the problem has got even worse. My PC doesnt even start. There is no problem with the power supply. The light in the mobo works. but when i power on the CPU the processor fan spins for about 3 seconds and then stops, the PC doesnt even startup now. Im now totally stuck. i even tried the bios recovery mode.. still no luck at all..
pleaseee help me