2 Replies Latest reply on Dec 30, 2016 3:12 PM by Intel Corporation

    I'm not quite sure what to do anymore.

    BanjoBoy

      Before I get into this, my original post -->  I Need Help! got locked so I sorry I couldn't get back to the 2 responses I got.

       

      Anyway,

       

      for Christmas this year I was given a breadboard which ended up giving me a new inspiration to get my Galileo working. So as seen here20161229_215855[1].jpg

      I first  start with nothing plugged in (having the micro sd card both in and out made no difference so I chose to leave it in in this example). I will plug the usb into my computer, and then the micro usb into the client port on the galileo.

      20161229_215934[1].jpg

      Then I plug in the power and this is what happens next --> First steps of galileo - YouTube  

       

      This is a list of the tutorials I was using for help:

      Getting Started with the Galileo - YouTube

      Getting Started with Windows on the Intel Galileo - YouTube

      IoT - Step 1: Make a bootable micro SD card | Intel® Software

      SD Card Setup and Sketch Persistent for Intel® Galileo Boards

       

      This is a picture of what my micro sd currently contains after I set it up using the 4th link above.

      Capture5.PNG

      Capture4.PNG

      When I try to run "Blink" using the Galileo compatible version of Arduino, I am given this error message:

       

      Arduino: 1.6.13 (Windows 10), Board: "Intel® Galileo"

       

       

      C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\laugh\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\laugh\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\laugh\Documents\Arduino\libraries -fqbn=Intel:i586:izmir_fd -vid-pid=0X8086_0XBABE -ide-version=10613 -build-path C:\Users\laugh\AppData\Local\Temp\arduino_build_545313 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.sketchUploader.path=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\sketchUploader\1.6.2+1.0 -prefs=runtime.tools.i586-poky-linux-uclibc.path=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0 -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino

      C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\laugh\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\laugh\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\laugh\Documents\Arduino\libraries -fqbn=Intel:i586:izmir_fd -vid-pid=0X8086_0XBABE -ide-version=10613 -build-path C:\Users\laugh\AppData\Local\Temp\arduino_build_545313 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.sketchUploader.path=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\sketchUploader\1.6.2+1.0 -prefs=runtime.tools.i586-poky-linux-uclibc.path=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0 -verbose C:\Program Files (x86)\Arduino\examples\01.Basics\Blink\Blink.ino

      Using board 'izmir_fd' from platform in folder: C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0

      Using core 'arduino' from platform in folder: C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0

      Detecting libraries used...

      "C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-g++" -m32 -march=i586 "--sysroot=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc" -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections  -D__ARDUINO_X86__ -Xassembler -mquark-strip-lock=yes -w -x c++ -E -CC -march=i586 -m32 -DARDUINO=10613  "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\cores\arduino" "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\variants\galileo_fab_d" "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\sketch\Blink.ino.cpp" -o "nul"

      Generating function prototypes...

      "C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-g++" -m32 -march=i586 "--sysroot=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc" -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections  -D__ARDUINO_X86__ -Xassembler -mquark-strip-lock=yes -w -x c++ -E -CC -march=i586 -m32 -DARDUINO=10613  "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\cores\arduino" "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\variants\galileo_fab_d" "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\sketch\Blink.ino.cpp" -o "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\preproc\ctags_target_for_gcc_minus_e.cpp"

      "C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\preproc\ctags_target_for_gcc_minus_e.cpp"

      Compiling sketch...

      "C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-g++" -m32 -march=i586 "--sysroot=C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc" -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -MMD -D__ARDUINO_X86__ -Xassembler -mquark-strip-lock=yes -march=i586 -m32 -DARDUINO=10613  "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\cores\arduino" "-IC:\Users\laugh\AppData\Local\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\variants\galileo_fab_d" "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\sketch\Blink.ino.cpp" -o "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\sketch\Blink.ino.cpp.o"

      Compiling libraries...

      Compiling core...

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\variant.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\fast_gpio_common.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\fast_gpio_nc.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\fast_gpio_sc.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\i2c.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\interrupt.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\mux.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\sysfs.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\trace.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\wiring_analog.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\wiring_digital.c.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\IPAddress.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\Print.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\RingBuffer.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\Stream.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\TTYUART.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\Tone.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\UtilMisc.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\UtilTime.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\WMath.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\WString.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\main.cpp.o

      Using previously compiled file: C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\pulseIn.cpp.o

      "C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-ar" rcs "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\core.a" "C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\fast_gpio_common.c.o"

      C:\Users\laugh\AppData\Local\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-ar: unable to rename 'C:\Users\laugh\AppData\Local\Temp\arduino_build_545313\core\core.a'; reason: Permission denied

       

       

      exit status 1

      Error compiling for board Intel® Galileo.

       

      (yes, yes I did feel the need to send this version of the error message.) lol.

       

      I am currently trying to use the Galileo via micro usb. I did try to use the 3.5mm port by making this 3.5mm to DB-9 female cable.

      20161230_003529[1].jpg

      Which I still don't know if works because I bought this other cable and this happened --> YouTube .

       

      The board's firmware is up to date as far as I know. I've updated it about 4 or 5 times now but I cant remember how to find it.

       

      So ya. I'm now stuck and don't really know what else to do. I hope I've provided enough information. Let me know if there's anything else I should include. All help is greatly appreciated!

        • 1. Re: I'm not quite sure what to do anymore.
          FGT

          Hi BanjoBoy,

           

          Without using the SD card (remove it and make the verification steps below without using the SD card at all) there are 2 problems, I think.

           

          Problem 1: Compile an Arduino sketch example for Intel Galileo card. Please follow the step-by-guide starting at

          IoT - Installing the Arduino* IDE | Intel® Software

          Take into account how to use the Boards Manager option so that the Arduino IDE is able to compile sketches for Intel Galileo.

           

          Regarding your first video,

          BanjoBoy wrote:

          ...

          Then I plug in the power and this is what happens next --> First steps of galileo - YouTube

           

          if you are using win10, then there is nothing wrong in it, I've reported this behavior a few days ago:

          Intel Galileo install in a brand new win10 computer - Arduino IDE (if you have trouble to get the .pdf with the sequence of steps please let me know)

           

          And please make sure you select Intel Galileo card in the Arduino IDE before you compile. You can carry out all of the steps for compilation without an actual Intel Galileo. You'll need the Intel Galileo if you want to upload and run the Blink example, of course.

           

          Problem 2: using the Intel Galileo serial interface. The video you posted:

          BanjoBoy wrote:

          ...

          Which I still don't know if works because I bought this other cable and this happened --> YouTube .

           

          does not show anything wrong so far. Once you plug in your Intel Galileo card the OS does not have to open/do anything, it has already recognized you have plugged in a USB-to-serial device before, and that's it. You should use a program to open a terminal and connect to your Intel Galileo. I use PuTTY, as shown in thread

          Can't open terminal in serial connection

           

          Once you are able to use your Intel Galileo we can go on the SD setting and usage, which is simple too.

           

          HTH,

           

          Fernando.

          • 2. Re: I'm not quite sure what to do anymore.
            Intel Corporation
            This message was posted on behalf of Intel Corporation

            Hello BanjoBoy,

            Thank you for interest in the Intel® Galileo Board.

            I think you should try the suggestions provided by FGT (thank you very much for the support provided). Once you check those, please share your experience with the community in case you need further assistance.

            Regards,
            Andres