11 Replies Latest reply on Jan 17, 2017 2:16 PM by Intel Corporation

    Why can't Intel RST see either NVMe drive - "No disks connected to system"


      I just got a nuc6i7kyk and I'm trying to set up a RAID through BIOS. I have two identical Toshiba OCZ RD400 SSDs installed. BIOS can see both of them.


      I followed the directions (RAID Setup Procedure for Intel® NUC Kit NUC6i7KYK ) and set up the two drives initially:

      Advanced -> devices -> SATA ->

           "Chipset SATA Mode" -> RAID

           M.2 Slot 1 RST PCIe Storage Remapping -> checked

           M.2 Slot 2 RST PCIe Storage Remapping -> checked


      Then saved, quit, and re-loaded BIOS. I then entered the Intel Rapid Store Technology Add-in config:

      Advanced -> devices -> Add-in Config -> "Intel(R) Rapid Storage Technology" -> configure


      And then all it shows is:

      Intel (R) RST RAID Driver:

      No disks connected to system



      BIOS can see the drives, they're both "remapped to RST," but Intel RST can't see them to build an array out of.


      Any help would be much appreciated.