1 of 1 people found this helpful
The Intel® Workstation Board S5520SC supports six DDR3 memory channels (three channels per processor) with two DIMM slots per channel, thus supporting up to 12 DIMMs in a two-processor configuration. Refer to Figure 15 for the Intel® Workstation Board S5520SC DIMM slots arrangement.
Please take into consideration the Supported Memory specifications:
Intel® Workstation Board S5520SC supports up to 12 DDR3 DIMMs with 1.5 V and a maximum of 192 GB memory capacity.
Intel® Workstation Board S5520SC supports Registered DDR3 DIMMs (RDIMMs), and ECC Unbuffered DDR3 DIMMs (UDIMMs).
Mixing of RDIMMs and UDIMMs is not supported.
Mixing memory type, size, speed and/or rank on this platform has not been validated and is not supported
Mixing memory vendors is not supported on this platform by Intel „ Non-ECC memory is not supported and has not been validated in a server environment.
Intel® Workstation Board S5520SC supports the following DIMM and DRAM technologies: „ RDIMMs: – Single-, Dual-, and Quad-Rank – x 4 or x8 DRAM with 1 Gb and 2 Gb technology - no support for 2 Gb DRAM based 2 GB or 4 GB RDIMMs – DDR3 1333 (Single- and Dual-Rank only), DDR3 1066, and DDR3 800 „ UDIMMs: – Single- and Dual-Rank – x8 DRAM with 1 Gb or 2 Gb technology – DDR3 1333, DDR3 1066, and DDR3 800.
Note:Upgrading from Mechanical disk to SSD will definitely improve speed on Read/Write jobs. Updating your graphics card will also improve the performance on your system.
For a more personalized support in regards to your inquiry you could contact us directly at Contact Support