10 Replies Latest reply on Nov 22, 2016 6:38 AM by dusharu

    S2600WTTR SDR auto-update failed

    dusharu

      Hi,

      I have 2 server Intel R2308WTTYSR  and I try update it with packet S2600WT_EFI_BIOS01010019_ME030103032_BMC014710181_FRUSDR113a.zip (Download Intel® Server Board S2600WT BIOS and Firmware Update for EFI )

      First server update and work - OK, but second server fail on update SDR.

      After update second server boot, but sometimes:

      1) coolers stop and then start at maximum speed.

      2) System ID LED blink 1Hz and Chasiss ID blink 3Hz and clear ipmi setting(ip, user)

       

      What is /conf/AutoCfg.dispay? How install it on system?

       

       

      2016-11-14 19.23.35.jpg

       

       

       

       

       

      System Configuration:

       

      Processed Tags

      FRU & SDR Update Package for Intel(R) Server Board S2600WTx (S

      2600WT_113a)

      Copyright (c) 2016 Intel Corporation

      Intel(R) Server Board S2600WTTR detected

      Auto-detecting chassis model and attached hardware.

      This may take up to 1 minute to complete.

      Detected Hardware

      **************************************************************

      ******************

      Intel(R) Server System R2000WT Product Family

      Intel(R) Server Board S2600WTTR

      Intel(R) Xeon(R) Processor E5-2600 in socket 1

      Intel(R) Xeon(R) Processor E5-2600 in socket 2

      Hot-Swap and Redundant fans

      Front Panel Temperature Sensor

      Baseboard FRU Device

      1100 Watt Power Supply Module 1

      Power Supply Module 1 FRU Device

      1100 Watt Power Supply Module 2

      Power Supply Module 2 FRU Device

      Redundant Power Supply Configuration

      HSBP 1 is a 2U 8 slot 3.5 inch HDD Backplane

      Riser 1 FRU found

      Riser 1 Temperature sensor found

      Riser 2 FRU found

      Riser 2 Temperature sensor found

      **************************************************************

      ******************