2 Replies Latest reply on Nov 8, 2016 11:09 PM by Emel

    I boot my bzImage on galileo, there are messy code during starting-up process

    Emel

      I create a (bzimage/grub/ext/efi ...) with yocto,

      ways  follow :

      ./setup.sh

      source ./iot-devkit-init-build-env yocto_build

      bitbake image-full

       

      put these into sd,then boot galileo ,

      there are a lot of messy code come out ,the location is

       

      {

      ......

      [grub]

      address=0xff800000

      item_file=../../meta-clanton/yocto_build/tmp/deploy/image-spi-galileo/grub.efi

      sign=yes

      fvwrap=yes

      guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87

      type=mfh.bootloader_signed

      svn_index=4

      [Linux-EFI, setup=0x10bb, size=0x1e0b00]

      [Initrd, addr=0xd7d0000, size=0x19da5c]

      ......(all messy code)

      ......

      }

      I want to ask guys ,there are some configs I forget before I run "bitbake image-full" ?

        • 1. Re: I boot my bzImage on galileo, there are messy code during starting-up process
          Emel

          grub.conf:

           

          default 2

          timeout 5

           

           

          color white/blue white/cyan

           

           

          title Quark X1000 kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU

              kernel --spi root=/dev/ram0 console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw

              initrd --spi

           

           

          title Quark X1000 kernel-MassStorage iot-devkit on SD IMR-On IO-APIC/HPET NoEMU debug

              root (hd0,0)

              kernel /bzImage root=/dev/mmcblk0p2 rootwait console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5

           

           

          title Quark X1000 kernel-MassStorage initrd-MassStorage RootFS-MassStorage IMR-On IO-APIC/HPET NoEMU debug

              root (hd0,0)

              kernel /bzImage root=/dev/ram0 console=ttyS1,115200n8 earlycon=uart8250,mmio32,$EARLY_CON_ADDR_REPLACE,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5 rootimage=image-full-quark.ext3

              initrd /core-image-minimal-initramfs-quark.cpio.gz

          • 2. Re: I boot my bzImage on galileo, there are messy code during starting-up process
            Emel

            I solve my problem! It's a nice day!