1 of 1 people found this helpful
As I have looked in August 2015, Intel Quark x1000 SoC Datasheet and I have found that Boot OS from SD/eMMC support is Yes but with some following notes. Also, I am booting Linux Kernel Image and full file system image from SD card into Intel Galileo Gne 2 board.
1. Must pair together with SPI chip.
2. Refer to the Intel® X1000 – Board Support Package (BSP) UEFI EMMC Patch on eMMC enabling for software
Would you please confirm above things and let me know what are changes required to boot OS from eMMC instead of SD card in software as well as hardware perspective?
Yes, it seems I was looking at an older version. In this case it seems that booting from eMMC is in fact supported. Go ahead and follow the suggestions from the note. According to the note you must look at the Quark BSP https://downloadcenter.intel.com/download/23197/Intel-Quark-SoC-X1000-Board-Support-Package-BSP- . There’s information related to booting from the eMMC mainly in sections 6 and 12.
Go through the steps and configuration recommended in the guide and let us know your