11 Replies Latest reply on Aug 25, 2016 2:59 PM by Intel Corporation

    Attempting to update BIOS - NUC6i7KYK - Frozen on Main block firmware

    Ryan_M
      • 1 x Intel NUC Skull Canyon NUC6i7KYK kit with 6th gen. Intel Core i7 processor, M.2 SSD Compatible, Dual DDR4 Memory ...

      • 1 x Microsoft Windows 10 Home - 64-bit - OEM
      • G.SKILL Ripjaws Series 16GB (2 x 8G) 260-Pin DDR4 SO-DIMM DDR4 2800 (PC4 22400) Laptop Memory Model F4-2800C18D-16GRS

      • 1 x SAMSUNG 950 PRO M.2 512GB PCI-Express 3.0 x4 Internal Solid State Drive (SSD) MZ-V5P512BW
      • 1 x Sandisk SD8SN8U-1T00-1122 X400 1TB M.2 2280 Solid State Drive

       

      Started having issues with my NUC last week where it would randomly freeze (No BSOD, just no movement of mouse/keyboard, and clock staying the same).  It got to the point where it wouldn't last a minute before freezing.  I saw today there was a BIOS update posted recently (81716), which I was hoping would solve the issue.  With Fastboot enabled, i was unable to hit F2/F7 to update the BIOS so I had to remove the Jumper cable, and use the .bio file from Intel.  It went right into the Recovery motherboard firmware update, but has unfortunately been sitting for about 15-20 minutes on Flashing image for Main Block Firmware.

       

      I've tried searching around, but the only info I have found has said to make sure not to turn off the computer while the BIOS is updating.  Any ideas?