5 Replies Latest reply on Aug 17, 2016 7:01 AM by Intel Corporation

    Intel Edison OTG Port Not Being Detected

    Chavez91

      When I connect the Edison, the OTG never mounts the Edison as a drive, virtual com or anything. I can connect via Serial using putty. So I have tried to re-flash. I have used Flash Lite, the install software, and flashall. Nothing seems to recover it. If i do "Run do_ota" it says the files cant be found. So I have installed Ubuntu so i could try the flashall.sh --recover command and that is failing also.

       

      Starting Recovery mode
      Please plug and reboot the board
      Flashing IFWI
      
      XFSTK Downloader Solo 1.3.3 
      Copyright (c) 2015 Intel Corporation
      Build date and time: Aug  4 2016 18:22:37
      
      Intel SoC Device Detection Failed: Attempt #0
      Intel SoC Device Detection Failed: Attempt #1
      Intel SoC Device Detection Failed: Attempt #2
      Intel SoC Device Detection Failed: Attempt #3
      Intel SoC Device Detection Failed: Attempt #4
      Intel SoC Device Detection Failed: Attempt #5
      Intel SoC Device Detection Failed: Attempt #6
      Intel SoC Device Detection Failed: Attempt #7
      Intel SoC Device Detection Failed: Attempt #8
      Intel SoC Device Detection Failed: Attempt #9
      Intel SoC Device Detection Failed: Attempt #10
      Intel SoC Device Detection Failed: Attempt #11
      Intel SoC Device Detection Failed: Attempt #12
      Intel SoC Device Detection Failed: Attempt #13
      Intel SoC Device Detection Failed: Attempt #14
      Intel SoC Device Detection Failed: Attempt #15
      Intel SoC Device Detection Failed: Attempt #16
      Intel SoC Device Detection Failed: Attempt #17
      Intel SoC Device Detection Failed: Attempt #18
      Intel SoC Device Detection Failed: Attempt #19
      Intel SoC Device Detection Failed: Attempt #20
      Xfstk tool error
      DEBUG: lsusb
      Bus 003 Device 004: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
      Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 005 Device 002: ID 1b1c:0c04 Corsair 
      Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 001 Device 014: ID 8087:0a99 Intel Corp. 
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
      Bus 004 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
      Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      DEBUG: dfu-util -l
      dfu-util 0.5
      
      (C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
      (C) 2010-2011 Tormod Volden (DfuSe support)
      This program is Free Software and has ABSOLUTELY NO WARRANTY
      
      dfu-util does currently only support DFU version 1.0
      
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=0, name="ifwi00"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=1, name="ifwib00"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=2, name="u-boot0"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=3, name="u-boot-env0"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=4, name="u-boot1"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=5, name="u-boot-env1"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=6, name="boot"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=7, name="rootfs"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=8, name="update"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=9, name="home"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=10, name="vmlinuz"
      Found DFU: [8087:0a99] devnum=0, cfg=1, intf=0, alt=11, name="initrd"
      

       

      Thats the output I get. I have even tried running the command "run do_flash" with the --recovery option and still the same results.

       

      If I run the flashall.sh with no options, it will complete successfully, but still won't mount or show any devices connected.

       

      Something corrupted, but Im not sure what. I even thought it might have been the Arduino break out board and I bought a new one of those. No luck.can

       

      Now I can configure the wifi and everything through serial and connect with the XDK and load the blink program and it will work. But cant connect using the Arduino software because it wont detect the board.

       

      I hope I made enough sense as to what my problem is. I have searched threads for the past 2 days with nothing that has solved my issue. My apologies if this has been answered before.