cancel
Showing results for 
Search instead for 
Did you mean: 

sequential write speed 540s

jjuua
New Contributor

Hi, I wonder if it is normal a rate of about 120 mb sequential write in my ssd 120GB 540s. Thanks

7 REPLIES 7

idata
Esteemed Contributor III

Pipet,

According to your post, the SSD is getting around 120 MB/s sequential write, we would like to ask you, what application are you using to test the SSD?Here are the http://ark.intel.com/products/94420/Intel-SSD-540s-Series-120GB-2_5in-SATA-6Gbs-16nm-TLC specs of the drive, where you can check the estimated sequential read & write. For testing, we used the IOmeter* software.If you have any more questions, please let us know.NC

jjuua
New Contributor

Thanks for answering. The software was used AS SSD Benchmark 1.9.5986 . According to the specifications intel page sequential write speed dberia be 400mb / s . The bios was set to AHCI mode before installing Windows x64 and intel® Solid State Drive Toolbox according to the firware is updated .

idata
Esteemed Contributor III

Pipet,

We use IOmeter* to perform the tests in our SSDs, this because we can handle the queue depth on it and provide valid information.Please find in this http://www.intel.com/content/dam/support/us/en/documents/ssdc/hpssd/ssd-750/sb/intel_ssd_750_series_... link how to configure the program to properly provide scores.If you need to download IOmeter*, here is the http://www.iometer.org/doc/downloads.html link.As well, we do know that CystalDiskMark is accurate at providing scores, if you want to try it here is the https://osdn.jp/projects/crystaldiskmark/downloads/65730/CrystalDiskMark5_1_2-en.exe/ link.Please let us know if you require further assistance.NC

idata
Esteemed Contributor III

Pipet,

We are following up this thread and we would like to know if you require further assistance. We will be waiting for your response.NC