Dual display with Intel 4600 in windows 10

[JLore5]

Hi,

I'm trying to set up at dual display configuration.

Display 1: DVI

Display 2: DVI -> adapter -> HDMI

When I boot Display 1 is working, once Windows has booted Display 1 says no signal and Display 2 is now working.

I have tried:

- Switching the displays

- Change resolution

The screens are duplicaded.

Johan

[r3un1on]

Hi,

Multi Display work not at Windows booting !

After Windows load the GPU Driver, all Display get Signal. That is normal.

[JLore5]

Yeah, but the question is not about dual screen in booting mode. It is not working when Windows has loaded.

[r3un1on]

Have you in Motherboard Bios Setting, Multidisplay on Enable ?

[idata]

Hi johanl,

What is your motherboard, processor and monitor model? Do you have the latest graphics driver installed? If not, try installing the latest version, you can download it here:https://downloadcenter.intel.com/download/26079/Intel-Graphics-Driver-for-Windows-10-15-40-4th-Gen-?product=81496 https://downloadcenter.intel.com/download/26079/Intel-Graphics-Driver-for-Windows-10-15-40-4th-Gen-?product=81496 Before installing the driver uninstall the one you have installed, please see http://www.intel.com/content/www/us/en/support/graphics-drivers/000005598.html Uninstalling the Intel® Graphics Driver and Intel® Display HDMI/Audio Driver Once the driver is uninstalled, you can go ahead and http://www.intel.com/content/www/us/en/support/graphics-drivers/000005629.html Manually Install an Intel® Graphics Driver in Windows® 10 & Windows 8* or Windows 8.1* If the troubleshooting steps above does not solve the problem, are you able to use a straight connection preferable HDMI from your motherboard to the monitor/TV or perhaps DisplayPort on your motherboard to the monitor/TV? Regards, Ivan