Use deploytool to deploy Windriver image from the target device to USB. It also be used to Backup the IDP from the target device to pen drive for recovery purpose.
Use the following steps deploy image from NUC box to Pendrive.
Boot the NUC box to Windriver 3.1 IDP
Attaching the Pendrive to NUC box. Use 16GB pendrive.
Run from the following command. for deploying IDP to pen drive. it will create a default IDP image one pendrive.
deploytool -y -C -d /dev/sdx ( dev/sdx is the pendrive. Change the letter "x" according to your setup)
Run from the following command. for taking IDP backup to pen drive. it will create a IDP image one pendrive which contain all the files and setting of the target device.
#deploytool -B 0 -y -C -d /dev/sdx ( dev/sdx is the pendrive. Change the letter "x" according to your setup)
The command may fail during the first attempt. Second time it will work.
For more info on deploytool usage refer #deploytool --help
Last Validated Info:
IDP Version: 3.1