C program can be used for this purpose. Follow below steps. usbreset.c
1,Compile the attached C program "
usbreset.c" using C compailer
$ cc usbreset.c -o usbreset
2.Get the Bus and Device ID of the USB device you want to reset:
Eg: Bus 002 Device 003: ID 0fe9:9010 DVICO
3.Make our compiled program executable:
$ chmod +x usbreset
4.Execute the program with sudo privilege; make necessary substitution for
<Device>ids as found by running the
Last Validated Info:
IDP Version: 3.1
Thanks Jobs. This is helpful. Could you give a practical scenario when a user has to reset USB ?