- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Category
Questions
Answers (N/A if not applicable)
Description
Provide a detailed description of the issue
I have version 4358 installed , and , it works fine .
The problem is that it won't stay loaded.
I have to reinstall it every time I wake the computer up from sleep, hibernate, or power up from a shut down.
Windows 10 starts loading, with it usual logo , a square, displaying using the DVI monitor and a separate VGA monitor ,
then turns off the DVI monitor, but , continues on the VGA monitor.
When it 's done , I just reload the Intel Graphics driver, and , everything is fine.
But, that is a nuisance.
So, it looks like something in Windows 10 isn't playing well with the graphics driver.
Please place an X to the right of the option showing how often you see this issue using specific steps. (Ex: 'Every few times a game is started it flickers.' <- This would be "Often")<p>
Always (100%):X
Often (51-99%):
Sporadic (20-50%):
Very Sporadic (<20%):
Hardware (HW)
Brand and Model of the system.
Board: ASRock Z77 Extreme4
Serial Number: E80-28005600262
Bus Clock: 100 megahertz
UEFI: American Megatrends Inc. P2.00 07/13/2012
<tr style="border: 0px; font-weight: inherit; font-style:...Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi petergmauro,
Intel released a new graphics driver. Please download and keep the current driver in your desktop then, uninstall and delete the current driver from device manager.
Finally, restart the system and install the new graphics driver manually from device manager.
Intel® Graphics Driver for Windows® 10 and Windows 7*/8.1* (15.33.43.4425)
https://downloadcenter.intel.com/download/25977/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8-1-15-33-?product=81499 https://downloadcenter.intel.com/download/25977/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8-1-15-33-?product=81499
Manual Installation of graphics drivers
http://www.intel.com/content/www/us/en/support/graphics-drivers/000005629.html http://www.intel.com/content/www/us/en/support/graphics-drivers/000005629.html
Mike C
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Mike,
Something looks funny:
My Device Manager properties says I have installed 10.18.10.4425
But, you've listed 15.33.43.4425 as the correct identification.
I have downloaded the file from the link you provided, and , installed , per your instructions.
But, still ,I'm showing " 10.18.10.4425 "
And, I still have the same problem, I need to reload the Graphics driver every time I start from power down , sleep, or hibernate.
Peter
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi petergmauro
That's why I don't use windows 10 yet
I don't know if really an windows or driver issue. but I wait till it's close to release the anniversary update as it's more stable.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi petergmauro,
You are already using the latest graphics driver on your computer. The last 4 digits determine the version.
Your system is showing a strange behavior. Please send me the Intel® System Support Utility results. I will create a lab with a similar configuration.
Intel® System Support Utility
https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility?product=91600 https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility?product=91600
Mike C
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi petergmauro,
I appreciated your response with the Microsoft system information; however, I need to collect more specific details of your configuration.
Send me the results of Intel® System Support Utility and the graphics control panel report.
Intel® System Support Utility
https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility?product=91600 https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility?product=91600
Graphics Report
Open Intel® HD Graphics control panel>Options & Support>Information Center and click save, keep the .txt in your desktop.
Mike C
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I just came here to say that Gosa's answer (# 53) in the old thread solved my problem.
Like all of you, I have had the same problem for 3 years now. HDMI port does not detect my external monitor after a reboot via HDMI to DVI cable. The workarounds on reinstalling drivers, disable/enable works until a reboot/sleep/hibernate. Then I'd have to do it all over again.
I have tried all the drivers from ones from 2012 to 2016. Nope. Bought different cables. Nope. NONE OF IT WORKS!
Then I read Gosa's post and immediately I knew 100% that this is the problem. I did the mod described in his post: http://philtechnicalblog.blogspot.hk/2013/03/fixed-dvi-pin-16-hotplug-dilema.html > Phil's technical blog : Fixed the DVI / pin-16 hotplug dilemma. However, instead of modding the cable, I installed a 1.2k OHM resister (didn't have 1k on hand) on the monitor's control board. There's a lot more room to work with on the monitor's control board and I didn't want to mess up a cable.
After the resister has been soldered on, I connected the monitor cable and heard that magical "device connected" sound. I seriously got goose bumps!
Please note that this isn't for everyone. I work on these things all the time so I am very comfortable doing this mod on the monitor. Intel needs to find a way to adjust the detection voltage or something because quite frankly, I've been following this thread for 3 years and I don't know how I missed his answer before. It was probably me just skipping to the last page hoping for an update. I'm just surprised that no one else tried Gosa's mod.
Perhaps this is a design flaw with the Intel HD series chips? Surely if it isn't hardware, it can be remedy with software but it's been so long, I don't think it's software at all. And admitting it's hardware is impossible since it will result in a recall of hundreds of millions of devices using these chips.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi turbo,
Have you tried using a DVI female to female gender mender , with a 1 K resistor between pin 16 and 14.
That might give an indication , that this fix is going to work , without having to cut cables or open up the monitor case.
What might be nice is a DVI tee, but, I haven't found one .
Peter
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi petergmauro,
I have not try it but technically, it would definitely accomplish the same thing. It doesn't matter if you put the resistor in the cable, an extension cable, a gender changer, or at the monitor circuit board, it will have the same effect.
If you use a female to female connector, you will need to add a male to male connector to change the gender back. But I do believe that would be complicated to install a resistor in one of those unless you can get a pre-made one that you can easily open to get access inside. But I suppose that would be safer then opening a monitor.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Mike C
Here is the results of the Intel Graphics information report:
Intel(R) HD Graphics 4000
Report Date: Sunday, April 24, 2016
Report Time [hh:mm:ss]: 2:31:18 PM
Driver Version: 10.18.10.4358
Operating System: Windows* 10 Pro (10.0.10586)
Default Language: English (United States)
Installed DirectX* Version: 12.0
Supported DirectX* Version: 11.0
Shader Version: 5.0
OpenGL* Version: 4.0
OpenCL* Version: 1.2
Physical Memory: 7894 MB
Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz
Processor Speed: 3400 MHz
Vendor ID: 8086
Device ID: 0162
Device Revision: 09
* Processor Graphics Information *
Processor Graphics in Use: Intel(R) HD Graphics 4000
Video BIOS: 2137.0
Current Resolution: 1920 x 1080
* Devices connected to the Graphics Accelerator *
Active Displays: 1
* Digital Display *
Display Type: Digital
Serial Number: ACR01aa
DDC2 Protocol: Supported
Gamma: 2.2
Connector Type: HDMI
Device Type: Digital Display
Maximum Image Size
Horizontal Size: 18.9 inches
Vertical Size: 10.63 inches
Supported Modes
640 x 480 (60p Hz)
640 x 480 (67p Hz)
720 x 400 (70p Hz)
800 x 600 (56p Hz)
800 x 600 (60p Hz)
1024 x 768 (60p Hz)
1024 x 768 (70p Hz)
1152 x 864 (75p Hz)
1280 x 1024 (75p Hz)
1280 x 1024 (60p Hz)
1280 x 800 (60p Hz)
1440 x 900 (60p Hz)
1920 x 1080 (60p Hz)
Power Management Support
Standby Mode: Supported
Suspend Mode: Supported
Raw EDID:
00 FF FF FF FF FF FF 00 04 72 AA 01 C4 DA 00 21
0A 16 01 03 80 30 1B 78 CA 35 85 A6 56 48 9A 24
12 50 54 B3 0D 00 71 4F 81 80 81 00 95 00 D1 C0
01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C
45 00 DD 0C 11 00 00 1E 00 00 00 FD 00 38 4C 1F
53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53
32 31 31 48 4C 0A 20 20 20 20 20 20 00 00 00 FF
00 4C 50 33 30 44 30 30 32 38 35 31 32 0A 00 CD
* Other names and brands are the property of their respective owners.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Turbo,
I just tried to measure 5 volts on pin 14 to pin 15 ground
it's not there, it shows an " open"
So , do I have a mother board problem?
Peter
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The HDMI/DVI ports do not connect directly to CPU. They have a controller. The controller is on mainboard. If that controller does not work correctly then is mainboard problem.
I have i7 6700k with igpu and I don't have any of those problems.
The subject of this post is not that the monitor is not detected. It is about turning monitor on or off, so I don't think any of that resistor problem applies here. So I think you are out of topic.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No. If you go back and read the original thread, you'd quickly realize that this is indeed an Intel problem. This common problem exists on multiple hardware platforms (laptop and desktop), different brands of systems and system boards, different OS (windows and Linux), and on different CPUs. It is virtually impossible to have the exact same problem with so many different hardware, EXCEPT they all have one thing in common: an Intel CPU with HD graphics.
Just because you don't have problems doesn't mean it doesn't exist, as evidence by the 3 year+ thread this continued from. If you look in Google, there are more forums posts elsewhere detailing this exact some problem. And again, if you read the original thread, you would know this IS about monitor detection problem. Also, if you read up on what the resistor does, it basically tells the monitor to "turn on" from standby. Therefore, allowing the computer to detect that there is a monitor plugged in and allow the proper settings to appear (allow multiple desktops etc.)
EDIT ADD: I noticed I made an error here. What the resistor does is ACTIVATE the PIN16 (Hot Plug Detect) by passing a small voltage to PIN16 from PIN14. This tells the OS that there's a monitor connected. I don't know the exact technicality of this obviously but for some reason, the OS does not sense enough voltage from PIN16 without the boost, and therefore thinks there's no monitor connected.
Remember, this problem is SPECIFIC to using HDMI to DVI connection. When I plug it any TV with HDMI, it works fine. I have a 4 year old monitor with VGA and DVI connection and no HDMI. But this is a really nice monitor. 21" Full HD IPS. Won't change it until it breaks!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, what I was telling you is just because the monitors are turned on by the system that means the mainboard circuits are ok ( that is if the controller isn't doing some funny stuff when 2 monitors are connected), and it's not the case to use that resistor unless you want monitor to be always turned on ...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please go back and read the original thread. The link is on the top of the page. I'm not gonna repeat all 8 pages. You are totally missing the point about this.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Read what the user said in the post ...
"Windows 10 starts loading, with it usual logo , a square, displaying using the DVI monitor and a separate VGA monitor ,then turns off the DVI monitor, but , continues on the VGA monitor.
When it 's done , I just reload the Intel Graphics driver, and , everything is fine."
So, the monitors are working, and it maybe a driver or windows 10 problem.
What am I missing here ? You think that it needs a resistor to forcefully turn on the DVI monitor ? What if is turning on with that resistor and there is no signal on it ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Turbo and Ronin,
First , thank you for replying to my problem.
I have an ACER monitor with both a VGA and a DVI input.
I also have a separate VGA monitor.
If I connect the VGA output from my motherboard to the separate VGA monitor ,
and the DVI output from the motherboard to the separate DVI monitor ,
then both monitors display the Windows 10 start up screen.
About half way through boot up , the DVI screen goes off, with the message " no signal "
Boot up continues on the VGA monitor , until completion.
The device manger at this point says that only a standard monitor is connected.
Then , I can reload the Intel Graphics Driver 10.18.10.4358,
and, the DVI monitor comes to life, with the correct 1920 X 1080 resolution.
And, the device manager now shows both
generic PnP monitor and S211 Hl monitor ( the acer DVI monitor)
I can repeat the same behavior , using the VGA and DVI input of the ACER monitor .
i. e. one cable to VGA and one cable to DVI
I should also mention that this problem only started when I mistakenly hot plugged a HDMI cable in to the mother board.
Before that, the DVI monitor worked fine.
I think that I may have damaged something , and , it seems to be confirmed by the fact that I don't have 5 volts on pin 14.
Which would maybe fix the whole problem , by just supplying an extra boost to pin 16
So, what we must determine is :
1. How does Windows 10 determine that there is a monitor connected.
2. What is the required voltage on pin 16
Thank you for sharing any information you have about this problem.
Peter
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
And if you have only one monitor connected on the DVI port is that monitor working correctly, or it just shuts down ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After reading your mainboard manual : ftp://europe.asrock.com/Manual/Z77%20Extreme4.pdf
In Caution Section is stated:
6. You can choose to use two of the three monitors only. D-Sub, DVI-D and HDMI monitors cannot be enabled at the same time. Besides, with the DVI-to-HDMI adapter, the DVI-D port can support the same features as HDMI port.
So when you connected HDMI also it may have created a problem maybe in driver.
Connect only one monitor.
Try to uninstall the driver.
After you uninstall Intel Driver use this utility: http://www.guru3d.com/files-details/display-driver-uninstaller-download.html Display Driver Uninstaller Download version 15.7.5.5
Select Intel at Graphic Driver.
Then click on Clean and DO NOT Restart.
That will remove any leftovers and settings from the old driver.
And then Set Automatic Installation Driver to default. And after that restart.
Then reinstall the latest driver for your igpu from here: https://downloadcenter.intel.com/download/25977/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8-1-15-33-?product=81499 Download Intel® Graphics Driver for Windows® 10 and Windows 7*/8.1* [15.33]
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ronin,
Yes, I know " only two outputs " from the ASRock mobo.
I wasn't trying to get three outputs, just accidentally plugged in a HDMI cable.
I'm about to try your graphics removal tool ,
I'll let you know what happens.
Peter
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page