4 Replies Latest reply on May 4, 2016 8:41 AM by nestor_intel

    Raid 0 bootable drive now listed as non Raid, help!

    Gam

      Hi there,

      - I have lost my 2 raid 0 drives, which were my booting drive for Windows.

       

      It happened to me while I was plugging into my pc another drive to check his content and by mistake -while shut down, one of my data cable to 1 of my ssd raid 0 got unplugged.

       

      Now after shutting down and replugging it in, they don't show anymore in my raid config, but just as non-raid when starting up.

      Disk 0 - INTEL SSDSC2CW240A \\.\PhysicalDrive0

      Disk 2 - INTEL SSDSC2CW240A \\.\PhysicalDrive2

      They show now in this order because I have now hooked up an extra HD (in IDE)to run Windows and testing disk programs.

       

      Here is my config:
      Asus P8Z77-I Deluxe /Z77 chipset
      2x Intel 520 Series SSD 240 GB

       

      What do you suggest I should do a as my next step so to make my ssd bookable again and run like before without having to delete them...?
      Troubleshooting I did before is to change the boot sequence,  unplug cables to 1 of ssd...and so on but no matter what my disk always show as non raid...