Up to what step of the BSP were you able to complete? The recommended BSP to build the Edison image is http://www.intel.com/content/dam/support/us/en/documents/edison/sb/edisonbsp_ug_331188007.pdf .
What bitbake command have you used, what section of the BSP were you following?
Thanks for your help.
Yes, My Edison image building exactly followed this:http://www.intel.com/content/dam/support/us/en/documents/edison/sb/edisonbsp_ug_331188007.pdf.
Edison source file is http://downloadmirror.intel.com/25028/eng/edison-src-ww25.5-15.tgz
I DO sure the intel.com is NOT blocked in mainland China.
When I use the command " bitbake Edison-image" after " source poky/oe-init-build-env " in http://www.intel.com/content/dam/support/us/en/documents/edison/sb/edisonbsp_ug_331188007.pdf page 7.
the build process stopped like this:
Can you help me? Thanks a lot!
Based on your “SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure” error I’d say there’s an ssl version incompatibility. I found online two suggestions that might help you. Both are described in this link http://serverfault.com/questions/560053/curl-succeeds-on-an-https-request-wget-does-not . The suggestions are to use the --no-check-certificate option and the --secure-protocol=sslv3 option with the wget command.
Give it a try and let me know your results.
I have exactly the same question, and I`m from China mainland, too. By simply clicking the http://download.xdk.intel.com/iot/xdk-daemon-0.0.35.tar.bz2 I can download the file, but I don`t know what to do next. By the way, I try the same code
and also shows"Unable to establish SSL connection.
Tell me how is it going now and what are you going to do ?
By using Ubuntu 12.04,whatever the OpenSSL version was,from 1.0.1d to 1.0.2, wget connection will always be refused by intel.com with SSL error.
So now, I am using Ubuntu 14.04 32bit for Edison image compiling.
Wget files from intel.com in Ubuntu 14.04 had been tested.
Compiling seems ok since then.
Cool, please tell me when you succeed in compling the edison image~
It seems you’re able to download the file from our website with Ubuntu 14. Seems to be an issue related to Ubuntu 12 and the SSL version. Try using Ubuntu 14 and let us know if you still see this behavior.
The compile process still failed like this:
I found that the file: 'org.eclipse.paho.mqtt.c.git' did not exist in eclipse official website, and the git library has changed.
The URL:http://git.eclipse.org/gitroot/paho was not here.
So I read this http://www.intel.com/content/dam/support/us/en/documents/edison/sb/edisonbsp_ug_331188007.pdf again,and want the compile process DO NOT download this file with comment org.eclipse.paho.matt.c.git download in edison_image.bb like this:
and rebuild image.
BUT the process still failed,the building process still git matt package......:-(
Give it up or retry?
to solve the Paho-MQTT problem, see this thread: Paho MQTT repository not found
In short, edit the file ~/edison-src/out/linux64/poky/meta-intel-iot-middleware/recipes-connectivity/paho-mqtt/paho-mqtt_3.1.bb
In the line SRC_URI do:
SRC_URI = "git://github.com/eclipse/paho.mqtt.c.git;protocol=http \
Finally,the compile process finished.
Two points need to pay attention:
1.Ubuntu 12.0 is incompatible with intel.com.
2.Must solve the Paho-MQTT problem.
Thanks all for your warm heart.