0 Replies Latest reply on Mar 30, 2016 12:47 AM by Holian

    How to clear warning and fault indication led?

    Holian

      Masters,

       

      Today we got tow warning from intel modular server, as you see below.

       

      I need help about this two questions:

       

        - how to monitor the condition?

        - how to clear this warning and how to stop warning led blinking?

       

      Thank you !

       

       

      Host Name: cbcmm

      IP Address: 192.168.1.207

       

      Date: 3/30/2016

      Time: 0:23:09

      Event Id: 2925

      Policy Id: 2070

       

      Severity: Warning

      Type: Chassis

      Component: Server 2

      User Name: System

       

      Description: Memory Error: Correctable ECC error with bank DIMM_F2. These are errors that occur in memory cells but are corrected by the chipset ECC engine.

       

      Probable Cause: Affected memory bank DIMM_F2.

       

      Corrective Action: Monitor the condition and replace the memory when necessary.

       

      Extra Data: s:68:"Raw IPMI (hex): Gen:3200 Num:02 Type:0c EDir:6f ED1:a0

      ED2:00 ED3:31";

       

       

      Host Name: cbcmm

      IP Address: 192.168.1.207

       

      Date: 3/30/2016

      Time: 0:23:31

      Event Id: 2927

      Policy Id: 1602

       

      Severity: Warning

      Type: Chassis

      Component: Chassis

      User Name: System

       

      Description: Sensor: Fault Indication; The Chassis Fault LED has been illuminated. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention.

       

      Probable Cause: Chassis Sensor: Fault Indication

       

      Corrective Action: Check the events report for other warning or critical events that may be contributing to the chassis fault. Take appropriate action to clear those events and the fault LED will be turned off.

       

      Extra Data: s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:6f ED1:01 ED2:ff ED3:ff";