Can you see the first UUID - 00001101........ ?
That is related to the serial port.
I downloaded the spp pro app and try to scan for my Edison board
i can see my Edison board but cannt make the connection sucessfully
but I can pair and connect from Edison to my phone with my built-in Bluetooth from phone
thanks for ur help:)
The reason why you are getting that output is because you are entering the file address incorrectly, your command is python sketch/SPP-loopback.py -c 22 when it should be python /sketch/SPP-loopback.py -C 22.Try it this way and let me know.
Also I noticed that in the command you use the option -c, that's not correct, you should use the option -C.
The command you entered this time seems fine but the error message you receive isn't. I believe the file of SPP-loopback.py might be corrupted or maybe the code wasn't pasted correctly. How did you put this file into your board?
Anyway, you could try to download it again to see if it helps. Follow these steps to do so:
1. Connect your board to the internet. In case you haven't done it already, you can set the Wi-Fi interface with the command configure_edison --wifi
2. Go to the directory where you would like to store the file, in your case /sketch. Use the command cd /sketch.
3. Delete the old SPP-loopback.py file with the command rm SPP-loopback.py.
4. Download the new SPP-loopback.py file with the command wget http://downloadmirror.intel.com/24909/eng/SPP-loopback.py.
Now try to follow the guide again.
I deleted the old SPP file, i connect my board to internet and downlaod the new SPP file as ur guide.
last time i use WinSCP to put the file inside my board but this time i downloaded to my board.
When i run this command python /sketch/SPP-loopback.py -C 22 its just stuck,i wait for like 15 minutes also not moving just stuck at the command
i really appreciate for ur help sir
Thanks for ur help