The red led it is the onboard status amt led which stays on as well, it is for the Active Management Technology. I dont remember if it can be turned off or not.
If you dont need AMT, disable it by going into the MEBx - Management Engine Bios Extension Ctrl + P.
Go to Intel Me Configuration
Go to Intel Me Features COntrol
Manageability Features Selection: None
Quiet System Tech. : Enabled
Save & Exit
All the best,
Hi, we have the same problem! We has three motherboard of model DQ45CB that had this problem.
The defect is an component, it heats and burn! The Intel claims the motherboard has physical defect and than warranty does not cover!
But we'll throw judicially because it is a not assemble problem or use problem, it is an factory defect.
Olá nós temos o mesmo problema! Nós já tivemos três placa-mãe do modelo DQ45CB que tiveram este problema.
O defeito é um componente que esquenta e queima! A Intel alega que a placa mãe apresenta defeito físico e por isso a garantia não cobre.
Mas nós vamos acionar judicialmente, pois isso não é um problema de montagem ou um problema de uso, isso é um defeito de fábrica.
DefeitoMarcado.JPG 1.4 MB
The Red LED you are referring to is the AMT Management Engine (ME) status indicator. Possible states:
If the LED is OFF then the ME state is OFF.
If the LED is ON then the ME state is ON and the system state is S0. It is fully functional.
If the LED is Blinking then the ME state is M1 and the System state is Sx. It is fully functional.
The LED is not indicating anything is wrong. Just indicating state of the ME.