4 Replies Latest reply: Feb 16, 2010 11:52 AM by samiliver RSS

    S5000psl "No Video"

    samiliver

        • 1. Re: S5000psl "No Video"
          Dan_O

          If you get three beeps with no memory, your processor and BMC are fine.  Maybe the memory got damaged somehow, when you were moving the jumpers?

           

          Have you tried clearing the CMOS a second time?

          • 2. Re: S5000psl "No Video"
            samiliver

            yes i had reset bios & cmos after that several times.

            I forget what time,changed jumper

            • 3. Re: S5000psl "No Video"
              Aryan2411

              Hello,

               

              Firstly, please download these files as reference:

               

              Technical Specification from the Website

               

              BIOS & Firmware Pacakge:
              from the download Website:

               

              How to create a bootable USB stick:
              http://gocoding.com/page.php?al=bootflashdos

               

              Now from the Technical Doc:
              Page 45 out of 75 explains to you how to make a cmos clear.
              Put back the jumper when done.

               

              Once this is done, make a fat-formatted bootable USB using the Tools from the website above.
              Download and extract all the firmware package from the above links. (note: extract the zip files.)

               

              Now again from the Technical Doc:
              Page 45 out of 75 explains to you how to switch the jumper to the secondary bios.

               

              So, switch the jumper to the lower bank bios, and then boot the system.
              Press F2 to go into the bios.
              Go to Boot Manager.
              Boot onto the bootable USB stick.
              Flash the bios by running BIOSxx.BAT batch file.
              Once this is completed, flash the bios again one more time reason being that there is two bios banks.
              Power off the system when finished.
              Put back the jumper.

               

              Power on the system.
              Press F2 to go into the bios.
              Go to Boot Manager.
              Boot onto the bootable USB stick.
              Update the firmware of the board by running:
              BIOS96.BAT for the bios
              BMC64.BAT for the BMC
              FSP42.BAT for the SDR
              Restart the system and check if the firmware have been flashed correctly.
              Bios Version: xx
              Go into Server Management >> System Information
              BMC Version: xx
              SDR Version: xx

               

              Hope this helps you a bit where to start. Let me know it goes.

               

              Kind Regards,
              Aryan.

              • 4. Re: S5000psl "No Video"
                samiliver

                thanks dear

                But i had clear cmos and i dont have video yet