7 Replies Latest reply on Apr 26, 2017 2:19 PM by Intel Corporation

    HD Graphics 630 will not keep settings




      Answers (N/A if not applicable)


      Provide a detailed description of the issue

      HD Graphics 630 always in "default" mode at boot

      Please place an X to the right of the option showing how often you see this issue using specific steps. (Ex: 'Every few times a game is started it flickers.' <- This would be "Often")

      Always (100%):X

      Often (51-99%):

      Sporadic (20-50%):

      Very Sporadic (<20%):

      Hardware (HW)

      Brand and Model of the system.

      Gigabyte Intel i5-7500 motherboard in Coolermaster Case.

      Hybrid or switchable graphics system?
      ie Does it have AMD or NV graphics too?


      Make and model of any Displays that are used to see the issue (see note2 below).
      = Local Flat Panel (Laptop panel)
      EFP = External Flat Panel (Monitor you plug in)

      EFP Hanspree HL205DPB x2

      How much memory [RAM] in the system (see note2 below).


      Provide any other hardware needed to replicate the issue.
      ie: Cables&brand, cable type [vga, hdmi, DP, etc], dock, dongles/adapters, etc

      Current connections: VGA to VGA and DVI to DVI

      Hardware Stepping (see note1 below).


      Software (SW)

      Operating System version (see note2 below).

      Windows 10 Home 10.0.14393

      VBIOS (video BIOS) version. This can be found in “information page” of CUI (right click on Desktop and select “Graphics Properties”.


      Graphics Driver version; for both integrated Intel and 3rd party vendors (see note2 below).

      Tried on both .4590 and latest version

      SW or Apps version used to replicate the issue.

      None needed


      Single display, clone, or extended (see note2 below).

      Extended (but has to be forced after boot)

      Display resolution & refresh rate setting of each display (see note2 below).

      1600x900 at 60p

      AC or DC mode, i.e. is power cable plugged in or not?


      How to repro

      Please provide steps to replicate the issue.  These steps are very crucial to finding the root cause and fix.
      A screenshot to illustrate the issue is a huge plus. A video of the failure is even better! Attach to the post or provide the YouTube link.

      1. Boot PC
      2. Note that only VGA output on
      3. Launch Graphics Control Panel
      4. Click Detect in Multiple Displays
      5. Save Profile and repeat from 1




      The above can be replicated 100% of the time at present. Attempting to create a two panel display system, but do not want to have to force detection every time PC is booted.


      Many thanks for any assistance.