5 Replies Latest reply on Jul 3, 2016 9:31 PM by Intel Corporation

    Programming iNVM on i210 via JTAG



      I have a new board with an Apalis  iMX6 (Cortex A9 Quad-Core) processor module running Linux and an Intel i210 Ethernet Controller.

      Although I attached an external FLASH to the i210 I would like only to program the I210 iNVM for the moment, in order to get the LAN working.

      The processor module is connected to the i210 via a PCIe lane.

      My question is - what is the easiest way to program the iNVM ?


      Running EEUPDATE or LANCONF from the processor module !

      Or maybe via the JTAG interface !


      Advice would be appreciated.