I am not sure, but I hope these links will be useful to you.
Also please try to refer to the motherboard manual (configuration) that came with the board for connector locations.
I have not found any more information about the pin layout for the front panel for this board. Also to be noted, that colours of the connectors are dependent on you chassis, so at this stage it is very difficult to tell which colour should go onto which pin.
Hope this will be helpful.
Unfortunately, i wont be able to help with the colour coded wiring, but from the datasheet below you will see that it is clearly explained which pins is for which connectors.
Page 68/128 - Pg 71/128
All the best,
thank you for the help. i am assuming that because the 3 pin and 5 pin are missing that i cannot connect a reset switch or activity led, since they are each 2 wires. don't really need them, anyway. a power switch and power led should be sufficient. i did finally found where the audio plug goes....i missed it between the 2 pci slots as the cards were already filled. now i am waiting for my new hd and dvd drive and will be ready to go.
thanks for everyones help.