3 Replies Latest reply on Nov 25, 2015 2:40 PM by Alpha.Sierra

    XDK will not connect to Galileo Gen2 through Ethernet


      - I verified Galileo is booting off the SD card image via the serial console.

      - XDK does not find the Galileo on local LAN. (Bonjour is installed)

      - Manual configured XDK connection, but connection is not established. Receive the following error:


      - Verified SecureConnection is set to True in XDK config file.

      - Tried setting a password on Galileo.

      - Successfully connected SSH Terminal to Galileo on port 22.

      - "Sytemctl" commands not recognized on Galileo (through serial console).

      - Firmware was upgraded from 102 to 104, with no change.

      - Tried everything on SD card images 102, 103, and 104.