Thank you for creating this new thread. Let me just summarize the steps that you can take to see if you can get the system to boot:
Clear CMOS for at least 30 minutes by removing all power to the board and the battery.
Roll back to version 0026 using the BIOS recovery method.
If this does not work, try with other BIOS versions.
If the system still does not post, then the BIOS may be corrupted and you would need to contact support.
I have tried that. But the computer just keep rebooting every 5 seconds. I have tried 0026 version bim and 0032 without success.
Sometimes the PC remains turned on when I tried any combinations of:
- removing battery
- removing the jumper/leaving the jumper on normal position
- turning it on/off
- letting it reset by itself
My USB is already connected when this happen but nothing shows up on the screen and the USB led never blinks(but the LED remains turned on) wich means the pc is not reading anything from it. I have waited more than 30 min with the pc on that state, even looking at the USB led waiting to blink.
After waiting this I rebooted it but it went back to the boot loop non stop.
I have built a writter for the BIOS ROM wich is my only hope now. I saw in this post DH87RL bricked - need a 1:1 BIOS flash image (have a programmer) that kevin_intel maybe could help me providing with the retail/original ROM content so I can write it on my BIOS rom. I can PM you my motherboard info if you want.
One more thing I find weird is that my board contains 4MB and 8MB rom. I really don't know wich one I should write but I hope you can help me with this.
I really really hope you can help me. kodonovan seemed to be the only one to help us with this kind of issue.