1 Reply Latest reply on Oct 7, 2014 5:19 PM by JPMontero_Intel

    Edison - with Arduino hardware


      My Senior Design team and i are having trouble retrieving a signal back from a DS1620 temperate sensor that is connected out our Arduino breakout board. I have attached the code we are using. This code works for the Arduino Uno board, but is having trouble with the Edison. Any help is greatly appreciated

        • 1. Re: Edison - with Arduino hardware

          I’d suggest if you have an Arduino expansion board to test with it to discard an issue with the wiring or the connections, just to double check. Another thing I’d test is the output that goes into the CLK with a logic analyzer to see If the clock signal is at the right frequency and also if there is any activity in the other pins.