Thank you Allan, I have attach a new disk to the same motherboard and install a new OS on it. The original four disks in RAID 10 volume are displayed as offline in Intel RST manager and I only have the option clean metadata.When I search the disk event in the help of IRST manager application, it shows the disk offline can be solved by unlock the disk. Shall I still click clean metaata or how to unlock all the four disks that displays as offline?
Do you know what action may trigger the RAID controller to mark all the disk as offline? I only change the SATA data cable to different SATA port on the same motherboard on the same Intel ICH10R RAID controller before the issue happens, why it causes the disk to be offline? I do not receive same issue on any other intel motherboard such as X58, Z77, X79, C602, etc.
Below you will find information about RAID 10 going offline.
A RAID 10 can fail due to bad sectors on any of the disks in the array. This can force the array to go offline.
In many cases, the partition table can become corrupt or missing causing an entire partition to disappear or become unusable.
For many reasons, the array can experience a controller failure. This can cause the array to go offline. It could also cause the logical volume to disappear.
Firmware problems can occur in the RAID controller or the member disk drives.
For various reasons, a RAID 10 array can experience a rebuild failure. This may keep member disks offline and render the array unusable.