Thank you for your post Entis,
Please note that the Intel® Centrino ® Wireless N 2230 card has a single band frequency meaning that this will work at 2.4 GHz with a maximum speed of 300Mbps
According to the description of your issue, you might set your wireless router to use channel bonding at 40 MHz. This will allow the router to use two channels at the same time.
You might also check the following links for further information:
Wireless Networking: What are the recommended settings for 802.11n connectivity?
Intel® Centrino® WiFi Products: Possible interference by other wireless devices may impact 802.11n performance.
Data rate will not exceed 54 Mbps when WEP or TKIP encryption is configured:
I hope this helps.
Thanks for the reply.
So i've set the router to channel bonding and everything was the same.
Then i've noticed that the WPA encyption is set to TKIP+AES
but when checking propreties on wi-fi card i get this
I've tried to change the setting on my router to WPA encryption AES but the i can't connect anymore: "windows was unable to connect" ,tried reseting the adapter, the laptop and the router, deleting the wireless network ...still not working.
Any ideea what to do next?
I'm facing the same exact issue with a brand new laptop with Wireless-N 2230 and windows 8. I noticed the question posted above was never answered. If you have resolved this issue, please let me know what was the solution.
I have been looking at this issue for the last few days with no luck. I did the configuration that was recommended above without any notable improvement in performance. N 2230 gives 1/5 of the performance that I get on any of the other laptops I have.
I have the same issue with my new HP dv7t-7000. I believe it's problem with the Centrino n2230 wireless card. I did update the driver, tried different configuration, and still cannot detect WPA2-Personal channel of my VIZIO router (XWR100 Dual Band), it can only detect WPA Personal channel. My old laptop, blackberry and iPad can detect the WPA2-Personal without any problem.
I recently got Fujitsu AH532 laptop with Centrino 2230 NIC. Even if I stand beside the AP, I never get full signal. If I try to use it than, the connection drops and is generally unusable. I've tried it with several accesspoints with the same results. If I walk further from the AP, I get no connection whatsoever.
If i plug cheap $5 802.11n USB stick from eBay, I get full signal and eventually really long rage.
I've heard about a guy with his AH532 having antenna disconnected from the factory, but it isn't my case.
There is a black antenna connected to "Main 1" and a gray one connected to "Aux 2". I've disconnected and reconnected them just to make sure there isn't a bad contact. It didn't help.
Anybody has idea, if the cables shouldn't be connected in the opposite order? I've read quite a lot from people having the same kind of trouble with this NIC in this forum.
What to do? I am sure the problem isn't in my Accesspoints. I have turned off powersaving features for the adapter.
I have the most recent drivers from Intel's site,
Alright so the network card by default only runs on 54mbps and you have to change a setting within the device manager.
1. open device manager
2. network adapters right click on the network adapter 2230
3. hit properties
4. advanced tab
5. 802.11n channel for band 2.4 should be set to auto
There you go it is by default set to 20 and will only run at 54mpbs also once enabled you will still likely only get 150mbps since to be honest this is a crappy network card. I had a gateway nv55su for a year and it constantly had 300mbps and 11MBps speeds. This laptop that I paid more than double the price of my previous laptop had a lower class network card? I get 300mbps half the time and that is with windows managing it the Intel wifi management software that came with it would always set it to 150 and give me 5-6 MBps speeds.
It's ok I deal with it the laptop still has a decent video card and processor which is why I purchased it. In the future I will never buy a dell/intel again due to the loss of customization and limitation of the hardware as compared to an AMD but I'll deal with it for now since I pad about $1000 for this laptop. Hope I helped some of you fix your network cards!
The problem appears to be that you have your Intel wireless configured for "Encryption type: TKIP." As per the documentation, this results in a maximum connection speed of 54Mbs. ("Note Data rate will not exceed 54 Mbps when WEP or TKIP encryption is configured." http://www.intel.com/support/wireless/sb/CS-030709.htm)
Since you have your router configured for "WPA encryption: TKIP+AES," you can simply reconfigure your Think Pad for AES encryption. In case that still doesn't work (I've seen something similar), you may also have to change your router to *only* allow AES encryption.
Hope this solves it - for you, and all the other commenters having the same issue!
Hello groschax! The product is not defective. Older security protocols like WEP or TKIP will limit the transfer rate to 54 Mbps; this is a limitation due to the advance in the new wireless protocol 802.11n which allows transfer rates higher than 54 Mbps (when not using above security encryptions). Let’s remember such transfer rate was the limit for previous wireless standards like 802.11 a/g.
It is for this reason that AES encryption has superseded the previously mentioned security protocols. Basically, 802.11n in combination with WPA2-AES will provide a higher throughput (up to 300 Mbps) and better security compared to older protocols.
The following article provides more information about this topic:
Recommended settings for 802.11n:
Can anyone else confirm if the issue happens with Windows* 7, Windows* 8 or both?