UPDATE: I think the comments have made it clear. Don't install this version.
UPDATE 2: Intel has identified an issue with the following BIOS versions, where the ability to overclock the system is not working after the BIOS update.
Intel regrets any inconvenience caused by this issue and is working to provide corrected BIOS versions as soon as possible.
by lhill at Apr 20, 2012 7:44 AM
Even though there are a couple things in the rev list I want (though not this inexplicable "fix": "Fixed issue where monitor will not remain in sleep state after wake from S3."), I'm probably not going to do it. Now there's not just the ever-increasing possibility of killing it, but if you're lucky you might only mame it. These two threads from the past week for the very similar DZ68DB should be sufficient warning, but it's not hard to find more:
UPDATE: there is a huge problem with version 0035 and the CPU turbo ratio configuration: please see other posts in this thread!
Just installed DZ68BC bios update 0035 with F7.
Little bit unclear that readme states that Intel ME firmware is now at 126.96.36.1992 and 188.8.131.524 at the same time. BIOS screen shows only 184.108.40.2062.
BIOS 0035 has been a DISASTER for me. I used the F7 method too and it said everything was successful yet the PC wouldn't reboot and kept flashing a 45 post error. Ok so that meant a memory problem. I have 2 sticks of 4GB Corsair Vengeance 1600MHz and they have never given me a problem and I always ran them at 9-9-9-24 @1600MHz using the XMP-1600 profile. Well now I cannot get beyond the 45 post error unless my RAM is at 1333. Enabling the XMP-1600 profile results in the PC not posting. It's maddening. Also the BIOS will not save any overclocking settings, at least not when I use the "Automatic" overclocking option. My "Active" settings show that I am running my 2600K at 5.9GHz even though it's set at 4.1GHz! Even though I set it to 4.1GHz, and the BIOS says it's running at 5.9GHz, the CPU is running at the default of 3.4GHz according to CPU-Z. Look at this screen pic:
Same issue here!
I noticed that "turbo boost power" -settings do remain at 60W ! (screenshot) at most, whatever settings within the bios are applied.
This naturally disables the "power boost" because it remains below the standard of 95W.
Attempts to alter these parameters fail as they seem to be locked.
my guess is that this is causing the problem.
any other ideas ?
0035 was complete disaster for me also. It broke down whole Turbo Boost. I have i7 2600 non K. It become unstable after the update! How such model becomes unstable!? I went to BIOS and noticed that multiplier settings for Turbo Boost were strangely changed upto 46! That shouldnt even be possible with this cpu...
Wattage settings were also jammed.
I had to disable whole Turbo Boost that I can use my computer. I am really disappointed.
And if someone asks why I updated the BIOS: I am using PWM and fans and looked forward to fix the "Front Fan issue".
I've just spent some time in a live chat with a technical guy from intel
and unfortunately retrieved no useful info at all. I wonder if it is
a real bug or if it is actually a "feature", just to outline the
ivy bridge's better performance which would not make much of a difference
if the sandy bridge isn't jammed .....
i should have checked online first coz now Bios 0035 has done the same thing to my i5 2500K what the hell is wrong with Intel, what's going on,....
Now iv got my Turbo Boost on ovaride too its at 5.9GHz what the hell i haven't overcloced the CPU yet the onlything i had changed was memory to XPM 1600MHz i have Corsair Vengeance 8GB Kit 2x4GB 1600MHz 220.127.116.11 1.5v
I have only had this board for 3 full days now i bought it on April 5th reached here around 12 april this is plus the i5 2500K i put it together 3 Days ago havent used it much any way, and now thisssss.... whats up Intel
if any one asks why i updated bios i had the Power issue and i thot it would be fixed with this Bios Update. and the Power Problem is still there after updating to bios 0035 i used the F7 method to update, can i atlist go back coz now i am afraid to switch on the Computer to the windows i dont want it to boot past the bios even tho it can
i found work around the power issue with some PSU like mine, is just to ON / OFF the power on the back of the PSU once or twice then try switching it on and it works for me, thets why i needed a bios update to fix this stupid PSU issue