1 Reply Latest reply: Feb 20, 2012 3:44 AM by ajcrean RSS

Help needed: RAM compatibility with Board DZ68DB

ajcrean Community Member
Currently Being Moderated

Hi all,

 

Am new to this forum and have an issue that I'd be grateful for any help on...

 

I've bought the components to build a new PC from scratch.  The key ones with regard to my question are:

 

Board: Intel DZ68DB

CPU: Intel i7-2700K

PSU: Antec VP650P 650W

RAM: Kingston HyperX Blu 4GB 1333MHz DDR3 Non-ECC CL9 DIMM  [Part No.: KHX1333C9D3B1/4G]

 

Have correctly seated the board in the case (all nine spacers and screws used; I/O shield installed.)

Have seated the CPU and Intel stock heatsink/fan.

Both the board and CPU power connections have been done, including the CPU fan.

Case front panel connected correctly.

 

When powering up, I get no warning tones and no display on my monitor.  Nothing else apart from these components is installed and/or powered.  The monitor is plugged into the Board's DVI port.

 

Is the RAM I'm using the problem?  I realise that it's not on Intel's official list of tested memory modules but I'm wondering if it simply does not work.

 

Any help and suggestions appreciated.

 

Many thanks,

 

Andrew

Cape Town, South Africa


More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points