3 Replies Latest reply: Dec 12, 2011 6:49 AM by Al_Hill RSS

Contact info for correcting typographical errors?

barry_rountree Community Member
Currently Being Moderated

As the Pin maintainers are well aware I tend to notice the occasional typographical error in the technical documentation.  I'm doing a close reading of a few chapters of the Oct. 2011 edition of volume 3B and have found a handful that are worth correcting.

 

Where should these corrections be sent?

 

As an example:

 

"Time Window for Power Limit #2 (bits 55:49): Indicates the length of time

window over which the power limit #2 The numeric value encoded by bits 23:17
is represented by the product of 2^Y *F; where F is a single-digit decimal
floating-point value between 1.0 and 1.3 with the fraction digit represented by
bits 23:22, Y is an unsigned integer represented by bits 21:17. The unit of this
field is specified by the “Time Units” field of MSR_RAPL_POWER_UNIT. This field
may have a hard-coded value in hardware and ignores values written by
software."  [Vol. 3B, 14-32]
23:22 -> 55:54
21:17 -> 53:49
[I think these are correct --- it's a simple cut 'n' paste error from the #1 case.]
Thanks,
Barry

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points