This discussion is locked
1 2 3 9 Previous Next 124 Replies Latest reply: Feb 26, 2013 10:56 AM by LS1 RSS

Intel 320-series SSD and FDE (Full Disk Encryption) questions...

tristpost Community Member
Currently Being Moderated

I am considering to buy a couple of new solid state drives for my company. A requirement is FDE and according to some info I found the new 320 series should support this. I have a few questions:

 

1. As far as I know none of our computers have any support in BIOS for disk password. Is this required for FDE to work with the 320 series or how exactly does the encyption / password entry work?

 

2. If we would like to use a RAID configuration (RAID 0 striping) is it still possible to use FDE and if so do one have to enter a password for each disk?

 

3. What about using two disks in the samer computer (non-raid) that is used to dual boot two different operating systems (say Linux and Windows 7) installed one OS on each drive - does FDE work in this case and would one have to enter a password twice?

 

4. Is the FDE solution dependent on some support in the OS (in that case what OS does it work with) or is it independent?

 

5. Do you have some white paper about the FDE with for instance information about how much slower it is compared to a non FDE drive?

 

6. I have read that TRIM does not work with SSDs in RAID configuration. Is this still the case and how dependent is the 320-series of TRIM?

 

/Trist

 

CORRECTION : I just found that our Dell Precision M6500 computers do have a field in the BIOS for disk password so I am interested in the questions above (two disks in the machine with or without RAID) also for this configuration. How do I know if the 320-serias FDE is compatible with the disk password setting in the dell M6500 machines? Is there a standard for this that all BIOS manufacturers follows or??


1 2 3 9 Previous Next

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points