I just build my PC and there was no Signal from the Graphic-card.
Because of that Problem i uninstalled nearly everything from the Mainboard.
Only the Power supply and the CPU are connected.
Mainboard: DP67BG Rev.B3
CPU: i7 2600k
Power Supply: Corsair TX650
Graphics: Sapphire HD6970
RAM: Corsair XMS3 1600MHz 2x4GB
When I start the Computer, only some Lights turn on and the Fans run. And stay running until Power off.
There are no Beep Codes that the RAM or the Graphics are missing, and the 2-digit Display shows nothing.
I think the CPU or the Mainboard is defective, but i can't say which is.
Without the CPU the Computer turns on and instantly off again.
Maybe someone can help me here?
Powering on without CPU is probably a pretty poor idea. Not sure what that would prove?
I have a Corsair 850W with the DP67BG and no issue. Did you plug in all power cables on the motherboard correctly? There are two that should go from your PSU to the motherboard. You also have to connect a fan to the CPU fan header or it will not post.
I would say it is very rare for a motherboard or CPU to be shipped defective, and your PSU shouldn´t be an issue. I also run 2x4GB corsair mem modules on my one so probably not those either.
Your first build?
Mine work with a Corsair HX620 even though that model is not listed as being compatible.
On a side note: when is the new B3 revision of the DP67BG going to be available at retailers?? You cannot find them at any of the major retailers (NewEgg, Amazon, Micro Center, etc.). I wonder what is taking so long? Every other P67 and H67 board that was released back in January for the Sandy Bridge launch has been available for a couple of months or more at all retailers. The DP67BG is nowhere to be found...weird.