• S5000PSL turns off after running for few seconds & no vga signal

    Hi,   This is my first time trying to build and I am no expert, so please understand if I ask for more details even for something simple. I have: 1) 2 x  Intel Xeon quadcore E5450 3Ghz 12MB L2 SLANQ 2) 3...
    Rjp
    last modified by Rjp
  • MFSYS25V2 All power supplies show as Unknown Device

    Hello   Our MFSYS25V2 is reporting that all four of the power supplies are "Unknown Devices" and the chassis is refusing to power up any of the servers with the error message "There is insufficient power availab...
    rbt_jared
    last modified by rbt_jared
  • Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016

    Hi,   I made the mistake in installing most recent RST on an older Intel S3200SHV Server board with Intel® 82801IR I/O Controller, evidently all hell broke loose as i got spinning dots at reboot. In order t...
    SarvenAtam
    last modified by SarvenAtam
  • S3420gp and RAM

    Hi everyone, i've searched for previous discussion, but every was locked. So i opened a new one for this question. I have the over-mentioned board, s3420GP and some rams: -4 sticks of KVR1066D3D4R7S/4G (mentioned on...
    zibibbalibbo
    last modified by zibibbalibbo
  • Omni-Path Fabric Design Related

    Referring the Intel® Server Board S2600BP and Intel® Compute Module HNS2600BP Product Family Integration and Service Guide .   1. #558210 - Intel Omni-Path Fabric Carrier Card Fab3 - Design Kit - Revis...
    ZAID
    last modified by ZAID
  • Should we roll back Bios if Intel pulled the latest version?

    I updated my Intel S1200SPLR server board bios as per instructions from Intel in this forum and been noticing many errors in my host OS and starting to wonder if they are not Bios related.  I just went back to se...
    ambient
    last modified by ambient
  • Intel Optane only as SSD instead of Memory running on ASUS B250H motherboard

    Hello out there, I am trying to setup my new brand 32 GB intel Optane on my ASUS B250H Gaming motherboard running windows 10 pro. I already check the intel recommendations. Reads all the manuals. Update my board BIOS ...
    MiguelHT
    last modified by MiguelHT
  • RS2SG244 RAID 6 with 12 Terabyte Helioseal WD Drives

    My server has 2 RAID 6 arrays, both RAID 6, 7 x 6tb Western Digital 6tb WD60EFRX Red SAN drives array & 16 4tb Western Digital WD4001FAEX Black Caviar Enterprise array.   I use an@ Intel S2600CP Motherboard ...
    Viv
    last modified by Viv
  • S2600G (Z/L) PCIe x16 without riser card

    Hi everyone,   I have a swift question regarding the PCIe x24 slots on the S2600GZ or S2600GL boards. I would like to know if it is possible to place regular PCIe x1, x4, x8 and x16 cards directly into the x24 r...
    Pitom
    last modified by Pitom
  • Had a melt down on a Win 2008 r2 with IRST.

    Hi. I have a server that uses 3-3 Terabyte drives to create a RAID 5 system for data. Had a crash and the Intel manager software said it fixed the problem but Windows Server 2008 R2 does not see it as a drive anymore....
    CharlesRGrenz
    last modified by CharlesRGrenz
  • Intel® Server Board S2600WFT will see pci raid controller rsp3dd080f

    I have a new Intel® Server Board S2600WFT  and a new RSP3DD080f which is compatible with the board but it will not detect the card   i have upgraded the server to the latest Bios and the card still w...
    Paulsbarnes88
    last modified by Paulsbarnes88
  • Wolf Pass Server 2600WFT Enumerates X710 PCI domain 10000 - DPDK will not load

    I have a Wolf Pass 2600WFT Server where I am trying to load a DPDK-assisted vSwitch as I do on the Wild Cat Pass. But DPDK fails to load because the Ethernet port is on PCIe domain 10000, instead of the normal 0000. ...
    nerdindenial2
    last modified by nerdindenial2
  • W2600CR - no video + POST beep

    Hey everybody,   I desperately need qualified help. I recently tried to assemble a budget workstation on the basis of the Intel W2600CR mainboard with 2x Xeon E5-2670 cpus. But I am not able to get the workstat...
    k0jiro
    last modified by k0jiro
  • Can I perform PCI-e NVMe RAID boot on C622 chipset or RSP3WD080E raid adaptor?

    Recently I need to set up a nvme raid system which I can boot OS from. I have 2 options:   1. upgrade to C622 platform 2. get an intel RSP3WD080E adaptor   I only need to perform raid 0 or 5, but the big ...
    Kagamine_Rin
    last modified by Kagamine_Rin
  • Intel Raid RMS3AC160 and Intel SSD DC S3520

    Hi guys,   I have a server with a RAID controller (RMS3AC160) and 24 Intel SSD DC S3520. I'm trying to do hardware encryption on SSD (using RAID 50 or 60). I've just installed the Premium Key AXXRPFKDE2 that en...
    Emyshor
    last modified by Emyshor
  • WDS client keeps losing it's IP address during windows setup, says it can't find DHCP. Ipconfig in winPE shows no network devices

    I've been having a strange and frustrating problem with trying to pxeboot on a wolf pass s2600WF. I have the latest bios installed. What happens is that it initially gets an IP and starts loading windows setup, but t...
    justletmelogin
    last modified by justletmelogin
  • Help Please, Intel S2600CW2R, Windows Server 2016, UEFI Boot

    First off, I apologize for being a noob.  I'm still trying to figure out what questions to ask to get the info I need.   I'm building an Intel Server with the S2600CW2R board, Intel RS3DC080 Raid, and 4- 4t...
    CWhitaker
    last modified by CWhitaker
  • ss4000-e not added to AD (не присоединяется к домену)

    hello!i have nas intel ss4000-e, latest firmware 1.4xxx710, domain windows server 2008r2. trouble: not added to active directory.on latest step, message-account not privelegie to added ad. the accounting entry consist...
    reiter
    last modified by reiter
  • Can I add more 2 HD's in RAID 1?

    Hi you all,     Currently I have 2 HD`s in RAID 1, but I need to make an upgrade by adding more 2 HD`s. Will I have to redo the RAID to to add them or does not support? What do I have to do?   Motherb...
    IWX
    last modified by IWX
  • R2208WTTYSR - ESXi Fatal Error 10

    Hi,   Problem: When starting ESXI, the error message "Fatal Error: 10" occurs and the VmWare does not start.   I found this with VmWare and have this also in the BIOS set up: "To workaround this issue the...
    Jn53HO
    last modified by Jn53HO